Mitel Forums > Mitel MiVoice Business/MCD/3300

Teleworker / 5010 IP phone

<< < (2/2)

Semperfi4000:
Thank you for your reply.   on the MX3300,  in form "Multiline IP Set Cong ", I have the 5010 setup. 
I tried testing the connection internally, and still didn't work.

the IP address for my MX3300 is 192.168.0.10.   

so, I put that address 192.168.0.10 on my 5010 in TFTP and RPC settings.

afterwards, I tried putting static addresses for the phone itself 192.168.0.253, and it bootup, with no RPCS error. However, it just hung on the address 192.168.0.253

Is there something I need to still configure on the MX3300 ?

thank you

bluewhite4:
Can you give us a break-down of all the settings that you statically put into the phone? Is the controller on a seperate VLAN?

Navigation

[0] Message Index

[*] Previous page