Teleworker / 5010 IP phone

[Semperfi4000]

I have Mx3300, and I have my IP phone running on a Teleworker server.
I am able to configure our 5020's and 5224's,  however, when I configure a 5010, i get the following error : RTCS bind err 505
On my other IP phones, I don't have a place to enter an  RTC address. 
does anyone know what this means ?
thank you.

[ralph]

This is directly from the current TW user guide:

The Teleworker Solution supports the following IP Phones:

[Semperfi4000]

Wow, ok thats not good.  I have 35 / 5010's..   Is there a way to implement these IP phones, without the Teleworker ?
Thank you

[ralph]

You'd have to set up a VPN between your home routers and your office router.
Or..
Point a public IP address to the 3300.

Ralph

[Chakara]

Wow - I didn't even know the 50xx series existed until now.  Take a look at 5212/5224's as fairly inexpensive replacements for those old style units...

-Chak

[Semperfi4000]

Thank you for your reply.   on the MX3300,  in form "Multiline IP Set Cong ", I have the 5010 setup. 
I tried testing the connection internally, and still didn't work.

the IP address for my MX3300 is 192.168.0.10.   

so, I put that address 192.168.0.10 on my 5010 in TFTP and RPC settings.

afterwards, I tried putting static addresses for the phone itself 192.168.0.253, and it bootup, with no RPCS error. However, it just hung on the address 192.168.0.253

Is there something I need to still configure on the MX3300 ?

thank you

[bluewhite4]

Can you give us a break-down of all the settings that you statically put into the phone? Is the controller on a seperate VLAN?