Author Topic: Ascom PBX PRI attached to 3300 delivering 4 digit numbers to cell phones  (Read 1120 times)

Offline demery

  • Contributer
  • *
  • Posts: 13
  • Country: us
  • Karma: +0/-0
    • View Profile
All,

I am having an issue where my 3300 is the telco connected controller but also serves an Ascom PBX inside my campus.  With Verizon utilizing spam blocking they are now blocking all of my outbound calls coming from our Ascom portable phones.  When I see the call come up on my cell it only shows the 4 digit number of the ascom phone and not the full 10 digit number that is associated with the phone.  I am using the DID Ranges for CPN Substitution form and the CPN Substitution form and have all of my PRI's configured to report the correct numbers for each internal extension.

Any thoughts suggestions?

Thanks


Offline demery

  • Contributer
  • *
  • Posts: 13
  • Country: us
  • Karma: +0/-0
    • View Profile
Re: Ascom PBX PRI attached to 3300 delivering 4 digit numbers to cell phones
« Reply #1 on: November 30, 2021, 12:33:33 PM »
Solved

Found an option inside our Ascom PBX that allows each device object to have a special "Send Number" attached to them.  Once this was programmed with each phones DID number the phones are now able to call out to Verizon phones that have the Call Filter enabled.

Thanks


 

Sitemap 1 2 3 4 5 6 7 8 9 10