Author Topic: Hunting group setup  (Read 3394 times)

Offline Pratiktailor001

  • New Member
  • *
  • Posts: 1
  • Country: us
  • Karma: +0/-0
    • View Profile
Hunting group setup
« on: June 04, 2021, 10:54:25 PM »
Hello. I got a call from the hotel they have sx-200 PBX. They have 5 analog phone lines connected to that system and it is in the hunting group from the phone service provider.  They would like to convert it to sip. I can get fxs gateway and convert sip to analog lines and connect it to PBX. I can port all 5 analog numbers to sip and connect to PBX or I can port the main number and add channels to it. But I have no idea how to create a hunt group in PBX and I don’t have any access info. Is there anybody who can help me here? We work with a new IP-based PBX so I have no clue how the old Mitel system works.
Thanks in advance.


Offline acejavelin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4104
  • Country: us
  • Karma: +133/-0
  • High-tech, heavy metal redneck!
    • View Profile
    • Like what I do and wanna help out? Send me a donation!
Re: Hunting group setup
« Reply #1 on: June 05, 2021, 02:11:15 PM »
The SX-200 does not support SIP... If the carrier wants to convert them to SIP, they will need to put in a SIP gateway or ATA and convert them back to analog lines. No changes in the phone system should be required, just move the jumpers on the LS/GS card to the new ATA instead of the old demarc.


 

Sitemap 1 2 3 4 5 6 7 8 9 10