Author Topic: Mitel 3300 MXe iii RAID vrs SSD  (Read 1474 times)

Offline Ross

  • New Member
  • *
  • Posts: 1
  • Country: au
  • Karma: +0/-0
    • View Profile
Mitel 3300 MXe iii RAID vrs SSD
« on: May 26, 2021, 02:42:55 AM »
Hi all

We have a Mitel 3300 MXe iii with RAID that one of the original Mitel Certified WD Scorpio Blue 160GB HDDs failed.
We replaced both drives with Kingston SSDs just off the shelf ones after advice from our Mitel vendor. The system has been up and running for some 6 months now.

A few weeks ago HD1 came up as bad and advice was to replace it so we sourced an exact same SSD.
I was instructed to hold the Mirror Cntrl Button down less than 5 sec to take the SSD offline which I did.
Much to my amazement the system did a "weird" thing and both drives came up good as gold - got the green tick of a health system.

Now HD2 has come up bad so of course I thought to run the same procedure on HD2 but of course there is no Mirror Cntrl Button for HD2.
The Mirror Cntrl Button on the HD1 side is of course the RAID Reset Button!

In THB on page 225 I can see:
"Note: To install two hard drives for RAID functionality, see “MXe III (Two Hard Drives)” on page 227. RAID is not available for solid state drives."

Question is - Have I been given the wrong advice and that using two SSDs with the RAID controller card is not a good thing?

The other question is, can I simply press the RAID Reset Button to clear the HD2 bad state?

Here is SHOW STATUS REDUNDANT:

SATA RAID Controller

   Hard                      Disk    Disk
   Disk   Installed   Fault  State   Status
   ----   ----------- -----  ------- ------
     1        Yes     No     Normal  Match.
     2        Yes     Yes    Bad     Timeout.

Disk 1 id matches
  Current Model Number  : KINGSTON SA400S37240G                   
  Expected Model Number : KINGSTON SA400S37240G                   
  Current Serial Number : 50026B7282648FEC   
  Expected Serial Number: 50026B7282648FEC   

Disk 2 id mis-match
  Current Model Number  : Not Applicable
  Expected Model Number : KINGSTON SA400S37240G                   
  Current Serial Number : Not Applicable
  Expected Serial Number: 50026B728264902F   

--*-*--

TIA


Offline dg

  • Full Member
  • ***
  • Posts: 113
  • Country: us
  • Karma: +2/-1
    • View Profile
Re: Mitel 3300 MXe iii RAID vrs SSD
« Reply #1 on: May 26, 2021, 01:43:06 PM »
For what it's worth, we just bought some mxeIII's with raid and ssd's and it's been fine so far. (installed earlier this year)
I'm not a certified Mitel tech, but I'd have to assume the guys that installed mine did so according to the official method. Perhaps there's a certain chipset or something that's mitel-certified or something?

Disk 1 id matches
  Current Model Number  : LITEON CV1-CB64                         
  Expected Model Number : LITEON CV1-CB64                         
  Current Serial Number : 0029321014EL       
  Expected Serial Number: 0029321014EL       

Disk 2 id matches
  Current Model Number  : LITEON CV1-CB64                         
  Expected Model Number : LITEON CV1-CB64                         
  Current Serial Number : 0029321014EE       
  Expected Serial Number: 0029321014EE     

(incidentally, I use those same drives in some 200 pc's and they work fantastic.)
-dg
« Last Edit: May 26, 2021, 01:44:57 PM by dg »

Offline dg

  • Full Member
  • ***
  • Posts: 113
  • Country: us
  • Karma: +2/-1
    • View Profile
Re: Mitel 3300 MXe iii RAID vrs SSD
« Reply #2 on: May 26, 2021, 01:45:21 PM »
For what it's worth, we just bought some mxeIII's with raid and ssd's and it's been fine so far. (installed earlier this year)
I'm not a certified Mitel tech, but I'd have to assume the guys that installed mine did so according to the official method. Perhaps there's a certain chipset or something that's mitel-certified or something?

Disk 1 id matches
  Current Model Number  : LITEON CV1-CB64                         
  Expected Model Number : LITEON CV1-CB64                         
  Current Serial Number : 0029321014EL       
  Expected Serial Number: 0029321014EL       

Disk 2 id matches
  Current Model Number  : LITEON CV1-CB64                         
  Expected Model Number : LITEON CV1-CB64                         
  Current Serial Number : 0029321014EE       
  Expected Serial Number: 0029321014EE     

(incidentally, I use those same Kingston drives in some 200 pc's and they work fantastic.)
-dg


 

Sitemap 1 2 3 4 5 6 7 8 9 10