Author Topic: UWP - no call/message history after system reset  (Read 1447 times)

Offline lundah

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1216
  • Country: us
  • Karma: +66/-0
  • Senior Chief Grunt
    • View Profile
UWP - no call/message history after system reset
« on: April 16, 2021, 12:26:50 PM »
Have a system where the users say after a system reset they have no call/message history in the user web page. Is this data cleared on a reset/reboot, or do I have a larger issue on this system?


Offline lundah

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1216
  • Country: us
  • Karma: +66/-0
  • Senior Chief Grunt
    • View Profile
Re: UWP - no call/message history after system reset
« Reply #1 on: April 16, 2021, 01:03:36 PM »
The plot thickens: I'm seeing a Major Reset: Code Change at the same time every day, then the system does a database restore and comes up. Running 6.3.6.21, no active SWA so I can't go to support on this one.

Offline Tech Electronics

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2983
  • Country: us
  • Karma: +89/-1
    • View Profile
Re: UWP - no call/message history after system reset
« Reply #2 on: April 16, 2021, 02:10:10 PM »
Lundah,

Check under Maintenance to make sure they don't have a daily reset schedule setup.

Also, it could be a power issue as well. We had a system getting brown-outs everyday at the same time, during lunch, and they also shows up as a Code Change.

Thanks,

TE

Offline lundah

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1216
  • Country: us
  • Karma: +66/-0
  • Senior Chief Grunt
    • View Profile
Re: UWP - no call/message history after system reset
« Reply #3 on: April 16, 2021, 09:05:35 PM »
No Major Reset schedule is set either. But it is strange that it happens at 7:35am. It's a small system, 16 5300 series IP phones and 6 SIP trunks. I'm a legacy 3300/MiVB guy, only been working on the 250's for a year, but this one has me stumped.

Offline lundah

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1216
  • Country: us
  • Karma: +66/-0
  • Senior Chief Grunt
    • View Profile
Re: UWP - no call/message history after system reset
« Reply #4 on: April 27, 2021, 09:51:06 PM »
So it appears the source of the Major Resets was a dead UPS battery. After the customer replaced that, everything's been happy for a week.


 

Sitemap 1 2 3 4 5 6 7 8 9 10