Mitel Forums > Non-Mitel Chatter

Hello All

<< < (2/2)

Tech Electronics:
jimbob76,

What is the part number for the Phybridge you are using so we can look it up?

Typically, the Phybridge is connected via a patchcord to the Network that the Phone System is connected to, but if you have one for Analog and Digital phone then you would have to have an Input and an Output on the Phybridge for that to work.

My guess is that the distance is too long for the Phone System to support an Analog or Digital Phone?

Thanks,

TE

jimbob76:
Unbelievably i forgot to write down which one it is and have now forgotten what it looks like.
Fairly certain it was a PolrE version with a single connector not a double But could have been a flex unit will need to see if I can pop in to site tomorrow to double check which it is.

In terms of length. The 100pair voice is between 100-200m in length at a guess around 150m between comms building A and DP in building B.

Only other option would be fibre but existing fibre only has 2 spare cores.

Navigation

[0] Message Index

[*] Previous page