Dear all,
I registered in this forum purely to ask this one question, which the great wide web did not reveal to me yet...
We have Data VLAN (lets say 1, but it will be another ID later on) and Voice VLAN 8
We use AAastra 5370ip phones, which should get a DHCP address in VLAN 8. The switch on the phone should offer access to DATA vlan 1 for connected notebooks
We do not use LLDP MED
I would much rather have the DHCP send the correct Voice VLAN ( 8 ) in the DHCP offer process.
Different guides state to use DHCP Options 043, 060, 156 ...
my last config string for 043 was like this : id:ipphone.mitel.com;sw_tftp=10.8.0.10;call_srv=10.8.0.10;vlan=8;l2p=6v6s6;dscp46v46s26
060 Vendor ID = Aamadeus IP Phone
156 = ftpservers=10.8.0.10, layer2tagging=0, vlanid=8
custom vendor class = ipphone.mitel.com. (ASCII)
... i tried lots of different options in combination, but I had no success
Each DHCP request of the phone puts them in the DATA VLAN IP range
Is there a complete, valid config manual for 5370IP ?
Or ist there some requirement, that I may be missing?
We have plain Layer2 Cisco Networks and a DHCP Server on Windows Server 2016
I prefer the Settings in the Windows enviroment, which I am more used in handling.
some guides I looked at:
http://unixwiz.net/techtips/mitel-ipphone-networking.htmlhttp://www.mitelforums.com/articles/3300/Mitel-3300-DHCP-Options.phphttps://oneview.mitel.com/servlet/fileField?entityId=ka40h000000GtXvAAK&field=Attachment_1__Body__sunfortunately, I am lost....
can someone share some knowledge / guide with me?
thanks and best regards!
David