Mitel Forums > Non-Mitel Chatter

Recommendations for SIP paging adapters

(1/4) > >>

ralph:
I have an application.  Non-Mitel related.
I need to be able to dial into a SIP based device, have it auto answer and then play the audio stream.  It's receive audio only - not talk back.
I need to connect 3 wall mount speakers to the unit that will all play the same audio path.
Preferably, this needs to be POE.

This is for an emergency medical services team.  When a specific type of call comes into a dispatcher, the dispatcher conferences in multiple doctors and specialist. The dispatcher then needs to conference in the speakers so the team can listen in on the call and begin making preparations. The call could last several minutes.

Does anyone have any specific product recommendations?

Ralph

NEPhoneGuy:
SNOM PA1 does this and is pretty inexpensive. We've used it with several platforms. No complaints.

Algo has an 8301 we've also deployed and it's got more frills.

Viking and Valcom have stuff too but haven't had as much experience.

ralph:
Thanks, NEPhoneGuy,
The SNOM 1 looks like it requires an external amplifier.   Does it?

Ralph

NEPhoneGuy:

--- Quote from: ralph on November 17, 2020, 01:36:32 PM ---Thanks, NEPhoneGuy,
The SNOM 1 looks like it requires an external amplifier.   Does it?

Ralph

--- End quote ---

It has a built in 4 watt amplifier and then we typically used powered horns.

Tech Electronics:
Ralph,

We use the Algo 8301 for that scenario.

https://www.algosolutions.com/wp-content/uploads/2019/11/Paging-Adapter-Amplifier-Integration-Guide.pdf

We have also used the Valcom IP Paging solutions as well.

https://www.valcom.com/products/ip_solutions/ip_applications.htm

Then there is also the old trusted Viking Electronics Line that is always the fallback choice.

https://www.vikingelectronics.com/products/fxi-1a/

Thanks,

TE

Navigation

[0] Message Index

[#] Next page