Author Topic: Strip all inbound caller identification on calls to specific DID  (Read 1214 times)

Offline PC77375

  • Full Member
  • ***
  • Posts: 191
  • Country: us
  • Karma: +6/-0
    • View Profile
So here is a scenario- I'd like to establish a number that people can call anonymously. I've toyed with ringing one line, that forwards as an external call, with CPN substition, to another DID. I cannot get consistent results with this. Sometimes I see no number, but I do see name...has anyone ever configured something like this? Consider an anonymous crime tip line.


Offline lundah

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1210
  • Country: us
  • Karma: +66/-0
  • Senior Chief Grunt
    • View Profile
Re: Strip all inbound caller identification on calls to specific DID
« Reply #1 on: October 29, 2020, 01:16:43 PM »
What type of trunk is it? You should be able to do it with Class of Service settings, but setting a different COS for one trunk/DID could get hairy depending on what type of trunk it is.

Offline PC77375

  • Full Member
  • ***
  • Posts: 191
  • Country: us
  • Karma: +6/-0
    • View Profile
Re: Strip all inbound caller identification on calls to specific DID
« Reply #2 on: October 29, 2020, 01:22:16 PM »
It's PRI- that's the tricky part. I don't want it to strip all inbound caller ID, just calls to a specific DID so I don't think COS for the trunks will not work in this scenario.

Offline johnp

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2201
  • Country: us
  • Karma: +66/-0
    • View Profile
Re: Strip all inbound caller identification on calls to specific DID
« Reply #3 on: October 29, 2020, 01:38:25 PM »
How many simultaneous calls? You could loop back an ons port to a ls trunk without class enabled

Offline PC77375

  • Full Member
  • ***
  • Posts: 191
  • Country: us
  • Karma: +6/-0
    • View Profile
Strip all inbound caller identification on calls to specific DID
« Reply #4 on: October 29, 2020, 01:58:51 PM »
How many simultaneous calls? You could loop back an ons port to a ls trunk without class enabled
Thought about that. It probably would never be more than one caller at a time. Not on premise at this time so prefer something can be done remotely.


Sent from my iPhone using Tapatalk

Offline sunspark

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 984
  • Country: mx
  • Karma: +16/-1
    • View Profile
Re: Strip all inbound caller identification on calls to specific DID
« Reply #5 on: October 29, 2020, 04:27:53 PM »
if I understood correctly, you don't want to display the DID number of incoming calls?

Offline PC77375

  • Full Member
  • ***
  • Posts: 191
  • Country: us
  • Karma: +6/-0
    • View Profile
Re: Strip all inbound caller identification on calls to specific DID
« Reply #6 on: October 29, 2020, 04:29:24 PM »
Correct. I need to strip all external caller identification before presenting to a user. The callers need to be assured anonymity. 


Sent from my iPhone using Tapatalk

Offline sunspark

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 984
  • Country: mx
  • Karma: +16/-1
    • View Profile
Re: Strip all inbound caller identification on calls to specific DID
« Reply #7 on: October 29, 2020, 04:33:03 PM »
what if you uncheck all "displays" in the Trunk + user COS ?

Offline sunspark

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 984
  • Country: mx
  • Karma: +16/-1
    • View Profile
Re: Strip all inbound caller identification on calls to specific DID
« Reply #8 on: October 29, 2020, 04:37:47 PM »
Correct. I need to strip all external caller identification before presenting to a user. The callers need to be assured anonymity. 


Sent from my iPhone using Tapatalk

set to no :

Display ANI/DNIS/ISDN Calling/called Number
Display ANI/ISDN Calling Number Only

you will see the name of your Trunk attribute ( you can display "Anonymous")

Offline PC77375

  • Full Member
  • ***
  • Posts: 191
  • Country: us
  • Karma: +6/-0
    • View Profile
Re: Strip all inbound caller identification on calls to specific DID
« Reply #9 on: October 29, 2020, 05:38:27 PM »
I think I already tried that. I’ll double check tomorrow. Thanks!


Sent from my iPhone using Tapatalk

Offline PC77375

  • Full Member
  • ***
  • Posts: 191
  • Country: us
  • Karma: +6/-0
    • View Profile
Re: Strip all inbound caller identification on calls to specific DID
« Reply #10 on: November 01, 2020, 03:28:18 PM »
Looks like I was able to pull it off by building a SIP trunk between two controllers. Still doing some testing, but it looks VERY promising so far.


Sent from my iPhone using Tapatalk


 

Sitemap 1 2 3 4 5 6 7 8 9 10