5330 Hot Desk Enabled.

[gpais70]

Hi Team,
It been more than 2 months since no access to our mitel 430.
We acquired more 2 mitel 6863I, however when I star the configuration the admin password does not work than I can not access the controller.
I do not intend to reset the system for obvious reasons will lose data and work hard.
Is there any way to access it?
Alternative password?

Germano

Enviado do meu ALE-L21 através do Tapatalk

[gpais70]

Hi Team,
It been more than 2 months since no access to our mitel 430.
We acquired more 2 mitel 6863I, however when I star the configuration the admin password does not work than I can not access the controller.
I do not intend to reset the system for obvious reasons will lose data and work hard.
Is there any way to access it?
Alternative password?

Germano

Enviado do meu ALE-L21 através do Tapatalk

[gpais70]

Hi Team,
It been more than 2 months since no access to our mitel 430.
We acquired more 2 mitel 6863I, however when I star the configuration the admin password does not work than I can not access the controller.
I do not intend to reset the system for obvious reasons will lose data and work hard.
Is there any way to access it?
Alternative password?

Germano

Enviado do meu ALE-L21 através do Tapatalk

[marcreid]

After replacing the UPS in one of my offices, our MiVoice 250 is stopped with "Waiting on CP" when power was restored. I can still SSH in to it but no Admin and Diag, phones down, PRI card is dark. Does anyone know of a fix for this? My Mitel "Partner" is unresponsive and Mitel won't talk to me. Any assistance is appreciated.

Sent from my Moto Z (2) using Tapatalk

[marcreid]

After replacing the UPS in one of my offices, our MiVoice 250 is stopped with "Waiting on CP" when power was restored. I can still SSH in to it but no Admin and Diag, phones down, PRI card is dark. Does anyone know of a fix for this? My Mitel "Partner" is unresponsive and Mitel won't talk to me. Any assistance is appreciated.

Sent from my Moto Z (2) using Tapatalk

[marcreid]

After replacing the UPS in one of my offices, our MiVoice 250 is stopped with "Waiting on CP" when power was restored. I can still SSH in to it but no Admin and Diag, phones down, PRI card is dark. Does anyone know of a fix for this? My Mitel "Partner" is unresponsive and Mitel won't talk to me. Any assistance is appreciated.

Sent from my Moto Z (2) using Tapatalk

[marcreid]

After replacing the UPS in one of my offices, our MiVoice 250 is stopped with "Waiting on CP" when power was restored. I can still SSH in to it but no Admin and Diag, phones down, PRI card is dark. Does anyone know of a fix for this? My Mitel "Partner" is unresponsive and Mitel won't talk to me. Any assistance is appreciated.

Sent from my Moto Z (2) using Tapatalk

[Livewired-uk]

We have a need to set the FQDN to the Enterprise FQDN/ IP address field.

This is easy enough for remote servers but not on the local one.

The help notes state this is accomplished in the MSL server manager. I've had a look but can't find an update field anywhere.

I assume in V8 it was set in the blade but this option has been removed in v9. As it's virtual the IP Address form has been removed too.

Has anyone got any ideas please?

Sent from my COL-L29 using Tapatalk

[Livewired-uk]

We have a need to set the FQDN to the Enterprise FQDN/ IP address field.

This is easy enough for remote servers but not on the local one.

The help notes state this is accomplished in the MSL server manager. I've had a look but can't find an update field anywhere.

I assume in V8 it was set in the blade but this option has been removed in v9. As it's virtual the IP Address form has been removed too.

Has anyone got any ideas please?

Sent from my COL-L29 using Tapatalk