Author Topic: 112 handset will not register to the base  (Read 1268 times)

Offline cahrens

  • Jr. Member
  • **
  • Posts: 32
  • Country: us
  • Karma: +0/-0
    • View Profile
112 handset will not register to the base
« on: February 11, 2021, 12:11:35 PM »
I have a 112 dect system that has been working with a 250 system. The customer lost or broke the original handset and I'm adding a couple of new handsets. I cannot get the handsets to register to the base. I have the new handset programmed and set the IPIE for the handsets. I put the handsets in register mode and ticked both handsets in the Extension screen and click on the "register handsets" button. The handset will not register

I attached snips of the extension and handset screens.
« Last Edit: February 11, 2021, 12:22:53 PM by cahrens »


Offline cahrens

  • Jr. Member
  • **
  • Posts: 32
  • Country: us
  • Karma: +0/-0
    • View Profile
Re: 112 handset will not register to the base
« Reply #1 on: February 11, 2021, 02:10:10 PM »
Figured it out. I had miss read the IPEI address on the phone. I thought one of the letters was an O but it was a D. All good now.

Offline NEPhoneGuy

  • Global Moderator
  • Sr. Member
  • *****
  • Posts: 218
  • Country: us
  • Karma: +5/-0
    • View Profile
Re: 112 handset will not register to the base
« Reply #2 on: February 12, 2021, 08:24:48 AM »
I don't typically enter the actual IPEI but instead enter all Fs and then set it to register and it will go automatically with the next register request from a handset.


 

Sitemap 1 2 3 4 5 6 7 8 9 10