Author Topic: upgrade Mivb from V8 to V9  (Read 1594 times)

Offline sunspark

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 986
  • Country: mx
  • Karma: +16/-1
    • View Profile
upgrade Mivb from V8 to V9
« on: September 25, 2020, 06:25:05 AM »
Hi guys

I would like to upgrade a virtual Mivb from V8 to V9, do I have to deploy a new VM in V9, run the Migration tool to recover a validated backup and then make a clear hardware Id of the VM on V8 and do then a restore  on the V9?

do you have the right method please ?


Offline mark.vanderheijden

  • Full Member
  • ***
  • Posts: 130
  • Country: nl
  • Karma: +8/-0
    • View Profile
Re: upgrade Mivb from V8 to V9
« Reply #1 on: September 25, 2020, 10:34:20 AM »
Hi,

As found in the migration guideline:

1.1 Perform the pre-migration audit of your
MiVoice Business system.
1.2 Ensure to select the current platform as
the target for migration.
 
2 Prepare your MiVoice Business system by
implementing the actions suggested in the
pre-migration audit report
Repeat steps 1 and 2 to ensure that the
system’s database is compatible.
 
3 Back up the compatible database.

4 Install the MiVoice Business Release 9.0 or
a later software.
 
5 Log in to Server Manager and activate the
license for the system.
 
6 Log in to the MiVoice Business System
Administration Tool.

7 Restore the compatible database. See Administration > Restore in the
Server Manager Help.

8 Log in to Server Manager and reboot the
system.

Offline sunspark

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 986
  • Country: mx
  • Karma: +16/-1
    • View Profile
Re: upgrade Mivb from V8 to V9
« Reply #2 on: September 25, 2020, 04:49:44 PM »
Hi mark,

This also what i found in the migration guide, but in step 5 i don't know if i should make a clear hardware id for the old server (v8)

Offline mark.vanderheijden

  • Full Member
  • ***
  • Posts: 130
  • Country: nl
  • Karma: +8/-0
    • View Profile
Re: upgrade Mivb from V8 to V9
« Reply #3 on: September 28, 2020, 02:47:55 AM »
Yes you should clear the HW ID, just make sure the old server has no internet connection.

Offline sunspark

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 986
  • Country: mx
  • Karma: +16/-1
    • View Profile
Re: upgrade Mivb from V8 to V9
« Reply #4 on: September 28, 2020, 04:12:36 AM »
Yes you should clear the HW ID, just make sure the old server has no internet connection.

ok , thanks , i will clear the hardware id , then shutdown the old server.


 

Sitemap 1 2 3 4 5 6 7 8 9 10