Author Topic: Call Forwarding - Delay In Reaching Destination  (Read 949 times)

Offline Josh7

  • Contributer
  • *
  • Posts: 26
  • Country: au
  • Karma: +0/-0
    • View Profile
Call Forwarding - Delay In Reaching Destination
« on: April 19, 2020, 06:38:08 PM »
Hi,

I  set up a call forwarding from a DID to mobile in the system by creating a phantom extension and then using the On-Line monitor tool to configure the relevant settings in Forward Information directory.

While I am happy that calls are being forwarded to the mobile, it does take time though for the mobile to actually ring when someone calls  the DID. It rings about 7 times on the caller's end before the mobile starts ringing.

Is there any timer settings that I need to change on the DB to enable the call to instantly hit the mobile?

Appreciate any feedback.

Thanks,
Josh


Online sarond

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1404
  • Country: au
  • Karma: +73/-0
    • View Profile
Re: Call Forwarding - Delay In Reaching Destination
« Reply #1 on: April 19, 2020, 09:12:57 PM »
Rather than using a phantom I would look at using DEE.

Set the mobile from there and put a # at the end of the number. This makes it dial immediately.

You could also look at putting a # at the end of your mobile number on the call forward of the phantom to see if that works as well.


 

Sitemap 1 2 3 4 5 6 7 8 9 10