Can I see what extension put a system into night mode?

[Chucked Wood]

Hello all, new guy here. I have been working on the Mitel 250 for about a year and half and still have a whole lot to learn.
Any and all help is appreciated.

My question is exactly what is in the subject line. Is there a way to tell what extension, or how a system was put into night mode?

Thank you all!

[acejavelin]

Hello all, new guy here. I have been working on the Mitel 250 for about a year and half and still have a whole lot to learn.
Any and all help is appreciated.

My question is exactly what is in the subject line. Is there a way to tell what extension, or how a system was put into night mode?

Thank you all!

Yes, just look at the system message output, it will list the exact date, time, and device that turned night mode on or off if it is a local device, or if this is a multinode network it may show the source as NODE XX or something like that, meaning a remote networked system.

[Chucked Wood]

Yes, just look at the system message output, it will list the exact date, time, and device that turned night mode on or off if it is a local device, or if this is a multinode network it may show the source as NODE XX or something like that, meaning a remote networked system.
[/quote]

Thanks for the response.

I can see where it tells you what time the system was switched into day or night mode looking at the history in system output message print.

However, we only have 1 node in the office and it is only telling me that 'node 1' was the source.

[Tech Electronics]

Chucked Wood,

Do you have a Phone Manager server?

The only way a MiVO-250 can be put in Night Mode is by one of the following:

Administrator Device/Phone
System Webpage
Phone Manager Server via OAI interface
Software created with the SDK via OAI interface.

Thanks,

TE



Sent from my iPhone using Tapatalk