Author Topic: License violation  (Read 3047 times)

Offline sunspark

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 984
  • Country: mx
  • Karma: +16/-1
    • View Profile
License violation
« on: February 10, 2020, 06:02:11 PM »


Hi guys.  I have 1 Mivb with a dlm and a cluster of 5 Mivb.  I installed the new security certificate on the 4 Mivb and I left the mivb with the dlm at the end.  When I installed my last certificate, after the retrieve license, my dlm went to No, impossible to give it to yes, so I made a clear hardware id of the Garid but since then I can change it to Yes.  I have the error below.  Any idea ?


“licensekeys” or “licensecert” file has
been corrupted


Online ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: License violation
« Reply #1 on: February 11, 2020, 08:48:10 AM »
Sounds similar to an issue I had.
I had one site where the controller was blocked from getting to the AMC by the firewall.
When I tried to save the licenses after uploading the new cert, I got that error.
As soon as the firewall issue was corrected it worked fine.

Ralph

Offline sunspark

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 984
  • Country: mx
  • Karma: +16/-1
    • View Profile
Re: License violation
« Reply #2 on: February 11, 2020, 11:29:56 AM »
Hi Ralph ,

not really similar case ,

Attached how to resolve it.

Offline sarond

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1401
  • Country: au
  • Karma: +73/-0
    • View Profile
Re: License violation
« Reply #3 on: February 11, 2020, 08:12:56 PM »
So does manually setting the Software Version in AMC resolve this or does AMC support have to get involved?

Offline sunspark

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 984
  • Country: mx
  • Karma: +16/-1
    • View Profile
Re: License violation
« Reply #4 on: February 12, 2020, 04:59:29 AM »

1st : need to contact amcsupport@mitel.com to check the Garid Tag version. when its done
2 : go back to : DLM , switch to YES , and sync ARID
3 : SDS sync from networks elements


 

Sitemap 1 2 3 4 5 6 7 8 9 10