Mitel Forums > Mitel MiVoice Business/MCD/3300
MiVB-X 8.0 - no way audio on transfers to EHDU's
lundah:
Got a head-scratcher that's been bugging me all week. Customer with MiVB-X 8.0, SIP trunks with carrier-provided NetVanta 3140 SBC (NexVortex is the carrier, MiVB-facing interface is a private IP in the 10.x.x.x range), and the MBG on the Express is doing indirect call recording to MiVCR. Incoming call is answered by a deskphone or softphone user, transferred to a user with EHDU set up to a cell phone. Caller hears MOH while the EHDU rings, when the xfer destination answers the cell phone, we get no way audio. If the transferring phone instead transfers directly to the cell phone, works fine. I suspect the MBG/indirect call recording is doing something funny, but I'm a little stumped on where to start. Any ideas?
pmhaynes:
a little bell is going off in my head around bo audio with SIP trunks and EHDU's
i will see if i can find anything that makes the bell louder and report back
sarond:
Try changing "Renegotiate SDP to Enforce Symmetric Codec" to Yes in the SIP Peer Profile form.
Does the tug.log show anything of value?
lundah:
Haven't checked tug.log yet. I bounced off Mitel tech support, they recommended changing a couple of Early Media related SDP settings, waiting to test in the AM when the customer is open. If that doesn't work I'll give the codec setting a try.
lundah:
So Mitel tech support suggested enabling "Allow using UPDATE for Early Media renegotiation" and "Force sending SDP in initial invite - Early Answer", and with those enabled the EHDU doesn't even ring. Tried "Renegotiate SDP to Enforce Symmetric Codec", and the EHDU rings but still gets no way audio.
Navigation
[0] Message Index
[#] Next page
Go to full version