Author Topic: Unable to add VM box  (Read 2961 times)

Offline petr.necas

  • Sr. Member
  • ****
  • Posts: 393
  • Country: cz
  • Karma: +8/-0
    • View Profile
Unable to add VM box
« on: October 22, 2013, 06:50:24 AM »
I installed a new system (ver 6.0 SP1) and configured VM, but I'm unable to add VM boxes. When I dial the VM hunt group 
pilot number the voice mail resonses correctly "Please enter your mailbox number....".

When I try to add a new VM box on VM Mailboxes a get this error message:

"The entered value is out of range."

In the log I can see following:

Log Type      Software
Log Number      777
Severity      Warning
Date      2013/Oct/22
Time      10:37:25
Source      CAVH_VOICE_MAILBOX
Description      insertTuple()->Error inserting Voice Mailbox simple tuple The entered value is out of range.
Module      Main
File Name and Line Number      CAVH_Voice_Mailbox.cpp;1901

In Users and Devices Configuration on Voice Mail tab the Voice Mail checkbox is grayed out and cannot be enabled.

Any ideas?


Offline Mattmayn

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1069
  • Country: vi
  • Karma: +14/-0
    • View Profile
Re: Unable to add VM box
« Reply #1 on: October 22, 2013, 07:16:25 AM »
How many digits are your extension numbers? If you have anything other than 4 you need to log into the admin mailbox and initialize the VM system and change the mailbox length to match your extensions.

Also, did you reboot after setting up the VM?

Offline jrg0852

  • Sr. Member
  • ****
  • Posts: 309
  • Country: us
  • Karma: +3/-0
  • Look out for the next tech. because it may be you!
    • View Profile
Re: Unable to add VM box
« Reply #2 on: October 22, 2013, 09:04:49 AM »
Simple question first.......you have VM licenses, right?

Offline petr.necas

  • Sr. Member
  • ****
  • Posts: 393
  • Country: cz
  • Karma: +8/-0
    • View Profile
Re: Unable to add VM box
« Reply #3 on: October 22, 2013, 09:42:06 AM »
Sure I have the enough Embedded Voice Mail licenses and also restarted the PBX.

The problem was that I was using 3 digits extensions (thanks to Mattmayn) and I did not realized there are 4 digits extensions set by defaut. So I logged into the Administrator's mailbox and chnaged the lenght to 3 (selected option 1 to begin a new installation and then selected option 3 to select new length)

Mattmayn, Thank you again.


 

Sitemap 1 2 3 4 5 6 7 8 9 10