Author Topic: Mitel SX-200 Embedded VM and AA  (Read 2465 times)

Offline Curtin_BPW

  • Full Member
  • ***
  • Posts: 91
  • Country: us
  • Karma: +2/-0
    • View Profile
Mitel SX-200 Embedded VM and AA
« on: December 10, 2019, 05:56:06 PM »
I set an AA using the embedded voicemail on a SX-200 AX controller running 5.0.2. The customer wants a "stay on the line" option to ring to the front desk. Is there a way to program this?


Offline johnp

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2209
  • Country: us
  • Karma: +67/-0
    • View Profile
Re: Mitel SX-200 Embedded VM and AA
« Reply #1 on: December 10, 2019, 07:56:19 PM »
Does it not by default transfer to zero box setting?

Offline acejavelin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4104
  • Country: us
  • Karma: +133/-0
  • High-tech, heavy metal redneck!
    • View Profile
    • Like what I do and wanna help out? Send me a donation!
Re: Mitel SX-200 Embedded VM and AA
« Reply #2 on: December 11, 2019, 07:27:02 PM »
If no selection is made the call is handled by mailbox 0... Make it a Transfer Only mailbox and enter the extension of the Front Desk in the mailbox.

Offline Curtin_BPW

  • Full Member
  • ***
  • Posts: 91
  • Country: us
  • Karma: +2/-0
    • View Profile
Re: Mitel SX-200 Embedded VM and AA
« Reply #3 on: December 19, 2019, 04:54:53 PM »
It plays the message a total of three times before it transfers the call.

Offline johnp

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2209
  • Country: us
  • Karma: +67/-0
    • View Profile
Re: Mitel SX-200 Embedded VM and AA
« Reply #4 on: December 19, 2019, 06:57:04 PM »
So MLAA. With MLAA there is now way around the repeat. You would have to use the default vmail hunt group and have a mailbox per keypress they could be transfer only

Offline Curtin_BPW

  • Full Member
  • ***
  • Posts: 91
  • Country: us
  • Karma: +2/-0
    • View Profile
Re: Mitel SX-200 Embedded VM and AA
« Reply #5 on: December 30, 2019, 09:51:31 AM »
Thanks all for your help. I had the customer re-record with a "Press 0 for operator"


 

Sitemap 1 2 3 4 5 6 7 8 9 10