Author Topic: MiCollab UC Client Softphone  (Read 1703 times)

Offline sergioamtz

  • Contributer
  • *
  • Posts: 8
  • Country: us
  • Karma: +0/-0
    • View Profile
MiCollab UC Client Softphone
« on: August 03, 2019, 05:57:49 PM »
Seeking for help to figure out on the UCA APP why my softphone keeps reading "Registration Failed"

I have the UC endpoint programmed in the MiVB and MiCollab.

I have licensing available in both.

I have tried changing seetings and doing re-deploying of the client.

Any hints are appreciated.
Thanks


Offline sergioamtz

  • Contributer
  • *
  • Posts: 8
  • Country: us
  • Karma: +0/-0
    • View Profile
Re: MiCollab UC Client Softphone
« Reply #1 on: August 04, 2019, 08:45:18 AM »
Update:

The softphone now is able to call out from the MiCollab app and I can answer the calls but the softphonekeeps dialing or ringing.

I can call internal extensions and I answer but the softphone keeps ringing like its not receive the signal that it answer already

Any help is appreciated

Thanks

Offline Biggie3300

  • Contributer
  • *
  • Posts: 14
  • Karma: +0/-0
    • View Profile
Re: MiCollab UC Client Softphone
« Reply #2 on: November 12, 2019, 11:26:17 PM »
Hi Sergioantz,

Check if PRACK is enabled on the MiCollab embedded MBG or if you have an MBG in DMZ too.

PRACK is enabled in the SIP device capabilities 71 assigned to UC endpoints, if it is disabled on the MBG you can get this issue.

Let me know if resolves.

Biggie


 

Sitemap 1 2 3 4 5 6 7 8 9 10