Mitel Forums > Mitel MiVoice Business/MCD/3300

Forking MWI Notifications

(1/1)

interopPbxs:
Is there a way to have the Mitel 3300 Rel 8 fork MWI notifications to multiple endpoints at the same time.

For example a user has a phone such as the 5212/5330/5340 either configured as IP or SIP. The user has a second device that will ring for incoming calls. This device could be setup as a multiline or mobile extension. In either case the device is SIP based and connected using a SIP trunk.

If the user receives an incoming call both the 5212/5330/5340 rings and the SIP device rings. When one answers the other one cancels. However if the user has a voice mail I need to have the light on the 5212/5330/5340 light up as while as have the shared SIP device receive a SIP Notify for voice mail notification.

I have tried setting up a multiline Set Key assignment for MWI on a SIP Phone (5212 and 5330) and it does not seem to work for SIP phones. For an IP device it works fine but not for SIP.

ralph:
Well I see your problem.   I don't think there is a way to put a MWI key on a SIP device for Non-SIP phones or visa-versa.
Haven't tried this so you may have to "lab it out".   I was able to add a Message Waiting Idication key on on of the SIP phones we have programmed.  Unfortunantly, I don't have a live SIP device to test with so you may have to "Lab this Out" if you haven't already.   It would at least seem to me that this would work.

Ralph

Navigation

[0] Message Index