Author Topic: 3300 wont boot.  (Read 981 times)

Offline Rspector

  • New Member
  • *
  • Posts: 3
  • Country: us
  • Karma: +0/-0
    • View Profile
3300 wont boot.
« on: October 13, 2019, 08:38:02 PM »
Good evening
I have a 3300 controller that won’t boot since it lost power on Friday. I have powered it on with an active serial connection and it successfully gets through the disk checks and the DB checks. The last line I get on my terminal is Reboot - don’t delete chksum file then it just hangs. I can ping and ftp(cant view files in ftp it says guest access is not allowed). I cannot http into the controller and the alarm led is flashing. I should add I cannot telnet Or ssh into it either. Is there a way to reset the alarm via the shell? Or at least see the active alarms?
Thank you
Rob
« Last Edit: October 13, 2019, 08:39:36 PM by Rspector »


Offline johnp

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2201
  • Country: us
  • Karma: +66/-0
    • View Profile
Re: 3300 wont boot.
« Reply #1 on: October 14, 2019, 07:00:34 PM »
Sounds like a drive issue


 

Sitemap 1 2 3 4 5 6 7 8 9 10