Hello
Systems are MiVoice Office 250, HX controllers, v6.3.7.58 to 6.3.7.99.
I am hoping one or more of you experts can either verify the networking is correct, or point out errors in the configuration below.
Company I work for went from two nodes to four. All nodes/sites are connected via fiber. I have two worries about the networking at this time:
1. In the SA&D GUI, on the System Information tab, in Networking Information N1-3 show N4 as only having VM instead of VM and IP. Links show IP connections between all nodes as good (no red.) N4 shows all as having VM and IP, with all links good (no red.) This mystifies and frustrates me, perhaps it knaws at the little bit of OCD I have, especially since I don't want to start adding phones and then have to redo a bunch of work.
2. I see various errors in SA&D GUI, System Output. Some of the errors are:
N1
-01:520- > -01:514- 11:43 06-19 M8027 SVR HW SS [7.0.0]: Illegal Data Byte Sent To Board: [C8,07,19,03,47,03,30,00,64,03,32,00,00,03,33,00,00,09,34,00,00,00,0A,00,FF,00,FF,02,47,00,02,35,03,03,36,00,50,05,37,C0,A8,C9,CA,03,38,C4,82,05,39,00,00,80,EA,05,3A]
-01:520- > -01:334- 08:41 06-18 M2039 INF HW CP Dead Socket Response From node: 4 Reason(304): Broken pipe
-01:520- > -01:335- 08:42 06-18 M2038 INF HW CP Failed Session Startup With Node 4
-01:520- > -01:336- 08:42 06-18 M2038 INF HW CP Failed Session Startup With Node 4
-01:520- > -01:337- 08:43 06-18 M2036 INF HW CP Established IP LINK To node 4
N4
-04:231- > -04:248- 17:18 06-18 M1002 INF DB CP Import Of Device Info From Node 1 Started
-04:231- > -04:249- 17:18 06-18 *** off_node_device_t::store: Invalid Field ID = 4
-04:231- > -04:250- 17:18 06-18 *** off_node_device_t::store: Invalid Field ID = 4
-04:231- > -04:251- 17:18 06-18 *** off_node_device_t::store: Invalid Field ID = 4
-04:231- > -04:252- 17:18 06-18 M1003 INF DB CP Import Of Device Info From Node 1 Completed
N1, Syslog
un 19 06:25:05 Mitel5000BOFF2 kernel: imklog 3.18.6, log source = /proc/kmsg started.
Jun 19 06:25:05 Mitel5000BOFF2 rsyslogd: [origin software="rsyslogd" swVersion="3.18.6" x-pid="641" x-info="
http://www.rsyslog.com"] restart
Jun 19 07:25:01 Mitel5000BOFF2 disk_info.ccare: /dev/hda1 (/) has 607M free space - 39% used (374M/990M)
Jun 19 07:25:01 Mitel5000BOFF2 disk_info.ccare: tmpfs (/lib/init/rw) has 50M free space - 0% used (0/50M)
Jun 19 07:25:01 Mitel5000BOFF2 disk_info.ccare: tmpfs (/dev/shm) has 50M free space - 0% used (0/50M)
Jun 19 07:25:01 Mitel5000BOFF2 disk_info.ccare: /dev/ram0 (/var/log/intl) has 2.2M free space - 42% used (1.6M/3.9M)
Jun 19 07:25:01 Mitel5000BOFF2 disk_info.ccare: /dev/ram1 (/var/log/diag) has 3.7M free space - 1% used (29K/3.9M)
Jun 19 07:28:39 Mitel5000BOFF2 file_check.ccare: [/etc/ppp/options] differs from backup
Jun 19 07:28:39 Mitel5000BOFF2 mem_info.ccare: 99MB RAM - 93MB used - 5MB free - 6MB buffers - 35MB cached
Jun 19 09:07:49 Mitel5000BOFF2 lighttpd[21920]: (connections.c.1702) SSL: 1 -1 error:140E0197:SSL routines:SSL_shutdown:shutdown while in init
Jun 19 09:17:25 Mitel5000BOFF2 lighttpd[21920]: (connections.c.1702) SSL: 1 -1 error:140E0197:SSL routines:SSL_shutdown:shutdown while in init
Jun 19 09:41:22 Mitel5000BOFF2 lighttpd[21920]: (connections.c.1702) SSL: 1 -1 error:140E0197:SSL routines:SSL_shutdown:shutdown while in init
Jun 19 09:41:23 Mitel5000BOFF2 lighttpd[21920]: (server.c.1444) [note] sockets disabled, connection limit reached
Jun 19 09:41:26 Mitel5000BOFF2 lighttpd[21920]: (server.c.1398) [note] sockets enabled again
Jun 19 09:42:04 Mitel5000BOFF2 lighttpd[21920]: (connections.c.1702) SSL: 1 -1 error:140E0197:SSL routines:SSL_shutdown:shutdown while in init
Jun 19 09:42:04 Mitel5000BOFF2 lighttpd[21920]: (connections.c.1702) SSL: 1 -1 error:140E0197:SSL routines:SSL_shutdown:shutdown while in init
Jun 19 09:42:04 Mitel5000BOFF2 lighttpd[21920]: (connections.c.1702) SSL: 1 -1 error:140E0197:SSL routines:SSL_shutdown:shutdown while in init
Jun 19 09:42:04 Mitel5000BOFF2 lighttpd[21920]: (connections.c.1702) SSL: 1 -1 error:140E0197:SSL routines:SSL_shutdown:shutdown while in init
Jun 19 12:45:26 Mitel5000BOFF2 sshd[18317]: error: Could not get shadow information for admin
Jun 19 12:45:26 Mitel5000BOFF2 sshd[18317]: Accepted password for admin from 172.26.106.66 port 29074 ssh2
Jun 19 12:45:26 Mitel5000BOFF2 sshd[18321]: error: setlogin failed: Function not implemented
Jun 19 12:45:27 Mitel5000BOFF2 sshd[18317]: lastlog_openseek: Couldn't stat /var/log/lastlog: No such file or directory
Jun 19 12:45:27 Mitel5000BOFF2 sshd[18317]: lastlog_openseek: Couldn't stat /var/log/lastlog: No such file or directory
CP_SYSTEM_LOG
2019-06-17 11:21:27 SSL] SSL_accept() failed - returned -1, error code 5
[2019-06-17 11:21:27 CP Master SSL Socket] SSL negotiation failed
I have pasted in a bunch of the networking information below. There are two primary sections below, network information from following networking starting at System, Devices and Feature Codes, Node IP Connection Groups and the second section starting at System, Devices and Feature Codes, Nodes. I traced the programming by following the sections, clicking each result to reach the next section. I hope it's something you can understand.
Why the one node showing only VM?
Are the errors a problem I should rectify before I proceed with setting up the phones?
From the bottom of my heart, thanks in advance for any help you can offer!
Jeff
I almost felt like I was making ASCII art (never have before), sorry about the lousy formatting.
Node 1 2 3 4
BO BW Ah Zi
192.168.201.51 192.168.201.52 10.250.7.50 10.7.6.50
Nodes (Node Route Group) 97001 97002 97003 97004
Processor Module P6000 P6100 P6300 P6400
Expansion Card P6001 P6101 P6301 P6401
D&FC Node IP Connection Groups* Off-Node IP Connections P8000 P8000 P8000
Extension P6000 P6000 P6000
IP Connections 97001 97001 97001
P6000 P6000 P6000
Node IP Connection Group P8000 P8000 P8000
Remote IP Address 192.168.201.51 192.168.201.51 192.168.201.51
D&FC Node IP Connection Groups* Off-Node IP Connections P8000 P8001 P8001
Extension P6100 P6100 P6100
IP Connections 97002 97002 97002
P6100 P6100 P6100
Node IP Connection Group P8000 P8001 P8001
Remote IP Address 192.168.201.52 192.168.201.52 192.168.201.52
D&FC Node IP Connection Groups* Off-Node IP Connections P8002 P8002 P8002
Extension P6300 P6300 P6300
97003 97003 97003
IP Connections P6300 P6300 P6300
Node IP Connection Group P8002 P8002 P8002
Remote IP Address 10.250.7.50 10.250.7.50 10.250.7.50
D&FC Node IP Connection Groups* Off-Node IP Connections P8001 P8001 P8002
Extension P6400 P6400 P6400
IP Connections 97004 97004 97004
P6400 P6400 P6400
Node IP Connection Group P8001 P8001 P8002
Remote IP Address 10.6.7.50 10.6.7.50 10.6.7.50
D&FC Nodes 97001 97001 97001
Node Trunk/IP Conn Groups P8000 P8000 P8000
Node IP Connection Groups P8000 P8000 P8000
Off-Node IP Connections P6000 P6000 P6000
IP Connections 97001 97001 97001
P6000 P6000 P6000
Node IP Connection Group P8000 P8000 P8000
Remote IP Address 192.168.201.51 192.168.201.51 192.168.201.51
D&FC Nodes 97002 97002 97002
Node Trunk/IP Conn Groups P8000 P8001 P8001
Node IP Connection Groups P8000 P8001 P8001
Off-Node IP Connections P6100 P6100 P6100
IP Connections 97002 97002 97002
P6100 P6100 P6100
Node IP Connection Group P8000 P8001 P8001
Remote IP Address 192.168.201.52 192.168.201.52 192.168.201.52
D&FC Nodes 97003 97003 97003
Node Trunk/IP Conn Groups P8002 P8002 P8002
Node IP Connection Groups P8002 P8002 P8002
Off-Node IP Connections P6300 P6300 P6300
IP Connections 97003 97003 97003
P6300 P6300 P6300
Node IP Connection Group P8002 P8002 P8002
Remote IP Address 10.250.7.50 10.250.7.50 10.250.7.50
D&FC Nodes 97004 97004 97004
Node Trunk/IP Conn Groups P8001 P8001 P8002
Node IP Connection Groups P8001 P8001 P8002
Off-Node IP Connections P6400 P6400 P6400
IP Connections 97004 97004 97004
P6400 P6400 P6400
Node IP Connection Group P8001 P8001 P8002
Remote IP Address 10.6.7.50 10.6.7.50 10.6.7.50