-patch laptop to “LAN” port in ATA
-use IE to web browse to 192.168.0.10 and login with “public” and no password
-click the “network” tab, select “VLAN”, under Link, enter “wan” and under ID enter “nnn”, click the + sign, then click apply.
-Click the interfaces tab. Next to “Uplink” change the drop-down menu from wan to wan.nnn. Click apply
-Click Host tab and enter Hostname, "ATA<name>"
-patch the ATA “WAN” port to the LAN switch
-click on the status tab and look under Interfaces Status and record the IP address that appears against the wan link interface.
-Go to "SIP" "Servers" and enter the controller IP address on the first 3 lines under "Default Servers". Click apply
-Go to "SIP" "Registrations" "Endpoint Registrations" and enter the fax extn under Phone/Fax-2. Click Apply.
-Go to "Media" "Codecs" and enable G.711 u-law (x2), disable G729 and T38. Click apply
-Go to "Misc" change Jitter Buffer to fax, and "Behaviour on CED Tone Detection" to "Fax Mode". Click apply
-Go to "Network", "DHCP Server" and disable DHCP on the "LAN" interface
-Go to Management / Access Control, update the password for both User names, press "Check All". Click apply
-Click the "reboot" link on the top right hand side of the screen
-In MiCollab, use your standard non-hotdesk user template for the correct zone to create a new user using the fax extension number as its DN and make it a SIP device.
-patch the fax machine to ATA analog port 2 labelled "fax".
-dial the fax DN to test
