Author Topic: 6920 PFKs all lit up red (Read 1325 times)

Curtin_BPW · « **on:** February 25, 2019, 02:27:36 PM »

I have a Mitel 6920 that has all of its programmable keys lit up red. Some of these are not even programmed. What could cause this issue?

acejavelin · « **Reply #1 on:** February 25, 2019, 03:16:54 PM »

What system? On a MiVoice Office 250 this is normal when the phones are unplugged...

Curtin_BPW · « **Reply #2 on:** February 25, 2019, 04:30:32 PM »

It is a 3300 MXe-III on 8.0 SP3 PR1.

Checking the maintenance logs shows "Please check COS configuration to make sure 'HCI' options are set for DN = '2042'" Under the COS for the phone both HCI options were set to "No". I updated both to say "yes" and rebooted the phone and it did not fix it. I then cleared all the PFKs on the phone and readded them and rebooted the phone which did not fix it. I then deleted the station and re added, and rebooted it and still nothing.

Tom2018 · « **Reply #3 on:** February 26, 2019, 06:52:36 AM »

Hi attached you my COS from a working environmet.
It's the cos 71
Maybe you want to try this one

regards,

Mitel Forums - The Unofficial Source

News:

Author Topic: 6920 PFKs all lit up red (Read 1325 times)

Curtin_BPW

6920 PFKs all lit up red

acejavelin

Re: 6920 PFKs all lit up red

Curtin_BPW

Re: 6920 PFKs all lit up red

Tom2018

Re: 6920 PFKs all lit up red