Author Topic: Set external Ring tone  (Read 4158 times)

Offline KChan

  • Contributer
  • *
  • Posts: 11
  • Karma: +0/-0
    • View Profile
Set external Ring tone
« on: October 23, 2010, 09:37:49 AM »
I want to change the ring tone of my Mitel 3300ICP so that external caller would receive a different ring tone from my 3300IPC when they call through PSTN T1 to my DID extensions.  :( :(


Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: Set external Ring tone
« Reply #1 on: October 23, 2010, 10:16:10 PM »
Your choices for external call ringing is double or single ring.
What are you looking to do?

Ralph

Offline KChan

  • Contributer
  • *
  • Posts: 11
  • Karma: +0/-0
    • View Profile
Re: Set external Ring tone
« Reply #2 on: October 25, 2010, 08:09:37 AM »
Ralph, Thanks the reply. It is double. I try to change the ring tone that the external call will hear when they call in my 3300ICP through the T1 PSTN trunks.

Kenny

Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: Set external Ring tone
« Reply #3 on: October 25, 2010, 08:59:45 AM »
Edit the COS of the trunk and change "External Trunk Standard Ringback" to YES.

Ralph
www.university-music-on-hold.com

Offline KChan

  • Contributer
  • *
  • Posts: 11
  • Karma: +0/-0
    • View Profile
Re: Set external Ring tone
« Reply #4 on: October 31, 2010, 04:53:44 AM »
Ralph,

Thanks!

By the way I have another problems on the Individual Trunk Access Code, I programmed this feature on System Option Assignment and allowed this features on COS, but when I tried to use this feature code the I have Access Denied on the digital telset. Do you have any comment?

Thanks!
Kenny

Offline bobcheese

  • Sr. Member
  • ****
  • Posts: 435
  • Karma: +3/-0
    • View Profile
Re: Set external Ring tone
« Reply #5 on: October 31, 2010, 06:13:12 PM »
when do you recieve 'access denied'? as soon as you dial the individual trunk access code or after the trunk number? A common error is the trunk number needs to be 4 digits long so even if the trunk you want to pick up is number 101 you must dial <access code>0101<number to dial on trunk>.

Offline KChan

  • Contributer
  • *
  • Posts: 11
  • Karma: +0/-0
    • View Profile
Re: Set external Ring tone
« Reply #6 on: November 01, 2010, 11:36:01 AM »
Ralph,

Thanks the reply. Access denied after I dialed the feature access code and any trunk number 2101 to 2123, actually the message shown on the IP phone is 'Invalid' but the strange thing is I can still able to dial out on this IDAP T1 to PSTN.

Thanks
Kenny

Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: Set external Ring tone
« Reply #7 on: November 01, 2010, 11:57:08 AM »
Invalid is not the same as Access Denied.

If it's Invalid, verify your access code.  If it's right, and your trunk number is correct, change the access code to something different:  try **2 or *#*#*#1   - it just has to be unique with no digit conflicts.

If it's Access Denied, double check your COS for individual trunk access.

Ralph
www.AAVoicePro.com/mitel


 

Sitemap 1 2 3 4 5 6 7 8 9 10