Author Topic: OAISYS Mivcr Issue  (Read 1775 times)

Offline sunspark

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 986
  • Country: mx
  • Karma: +16/-1
    • View Profile
OAISYS Mivcr Issue
« on: October 04, 2018, 04:39:07 AM »
Hi guys

Each Time when the physical server restart , the Oaisys Level2OAI MitelDriver  service Fail to start automaticaly. When i try to start the service i get :  "error 1053 the service did not respond to the start or control request in a timely fashion"

So to resolve temporarily the issue , i have to stop OAISYS Level2OAI NetServer , then start Oaisys Level2OAI MitelDriver 

i've tried this solution without succes :

1.Go to Start > Run > and type regedit.
2.Navigate to: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control
3.With the control folder selected, right-click in the pane on the right and select new DWORD Value.
4.Name the new DWORD: ServicesPipeTimeout.
5.Right-click ServicesPipeTimeout, and then click Modify.
6.Click Decimal, type '180000', and then click OK.
7.Restart the computer.



Any idea ?


Offline markyb73

  • Full Member
  • ***
  • Posts: 102
  • Karma: +5/-0
    • View Profile
Re: OAISYS Mivcr Issue
« Reply #1 on: October 09, 2018, 03:14:27 PM »
what version are you running?

Offline sunspark

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 986
  • Country: mx
  • Karma: +16/-1
    • View Profile
Re: OAISYS Mivcr Issue
« Reply #2 on: October 09, 2018, 06:56:56 PM »
what version are you running?

Hi Markyb ,

V9.0 1005.0

Offline markyb73

  • Full Member
  • ***
  • Posts: 102
  • Karma: +5/-0
    • View Profile
Re: OAISYS Mivcr Issue
« Reply #3 on: October 12, 2018, 03:46:51 PM »
Hi,

I haven't seen an issue like that.
I have seen issues with the Mitel Driver hanging and has normally been fixed with an upgrade.
There are a couple of higher 9.0 releases on Mitel's download site, your version i cannot see so i would think that they would steer you towards an upgrade, they certainly do that when i have issues with older call recorders.
If i was looking at yours i would be looking to take it all the way to the latest version of 9.1 as that has fixed alot of issues with my customers, as long as your PBX's/MBG/SRC's are a high enough version to support it.
Are you an end user or a reseller/VAR?



 

Sitemap 1 2 3 4 5 6 7 8 9 10