how to find internal IP address of cx 3300 with putty

[martynsmitel]

hi gut I am Martyn, I have bought a secon hand ip phone system off ebay with phones to learn by experiment how to use and administor the system.  I want to use software inside to add extensions change names time ect. As it is second hand was not given the ip address to sign in, also not got any sign in user name or passwords.

I am wondering if any of you guys could help me to break in throught putty to reset username and pass word and find the correct ip address to put in the broser to sign in.

Hope this ment sence so i can go further

Thanks Martyn

[sarond]

in putty type version this will display IP and boot info
.Next try swrevs to let us know the software version.

[martynsmitel]

Thank you will try this later on

[martynsmitel]

version
Vxworks (for mitel embedded PPC82XX f64) version 5.5.2
Kernel: wind version 2.6.
made on Apr 28 2008, 17:55:24
Boot line:
ata=0,0(0,0):/partition1/Rtc8260 e=192.168.1.2:ffffff00 h=192.168.1.187 g=192.16
8.1.251 u=ftp pw=ftp o=motfcc
value = 121 =0x79='y'

swrevs
software version 8.0.10.7_1
system relink: no relink has been applied.
call control relink: no relink has been applied
value = 28 =0x1c

this is the information off putty could not send picture some how.

thanks



Martyn

[sarond]

Ok thats quite an old version.

You would need to remove the user database and reboot the controller.

From RS232
Type cd "/db/database/files", then rm "usrprfle.db"

don't forget the "'s they are needed.

Reboot the 3300..

This should remove the users and allow you to login with system/password

[martynsmitel]

Thanks in Work and will try it when I get home. Where will I find the system I’d and password when I have done it.


Sent from my iPhone using Tapatalk

[sarond]

This should remove the users and allow you to login with system/password

That is the default login id.
Username: system
Password: password

[martynsmitel]

Ok thanks

Bit blonde then.

Thank you for your help


Sent from my iPhone using Tapatalk

[martynsmitel]

I would just like to say a massive thank you for your help. Without it I could not of got anywhere. Thanks


Sent from my iPhone using Tapatalk

[sarond]

Glad you got it sorted.