I have a 3300 where the embedded voicemail is not working.
Looking at Alarms I have DSP failure - major 4 total, 25% unavailable.
If run SHOWDSPSTATUS I get the following:
Slot Number 6 Dsp 0 State: IDLE
Slot Number 6 Dsp 1 State: ACTIVE
Slot Number 6 Dsp 2 State: ACTIVE
Slot Number 6 Dsp 3 State: ACTIVE
Also ran DumpDspBootInfo:
DumpDspBootInfo
Dsp(0,0): mmcSlot=7 (1-based) Load Type: TELEEC(6,"/sysro/DspConfig/TeleEC.363")
Mod Type: NOCONFERENCE(1)
Dsp(0,1): mmcSlot=7 (1-based) Load Type: TELEEC(6,"/sysro/DspConfig/TeleEC.363")
Mod Type: NOCONFERENCE(1)
Dsp(0,2): mmcSlot=7 (1-based) Load Type: TELEEC(6,"/sysro/DspConfig/TeleEC.363")
Mod Type: NOCONFERENCE(1)
Dsp(0,3): mmcSlot=7 (1-based) Load Type: TELEEC(6,"/sysro/DspConfig/TeleEC.363")
Mod Type: NOVOICEMAIL(7)
value = 29 = 0x1d
Any thoughts? Is this a hardware failure? Or the DSP just hung up. Would a system reboot fix this issue?
I did try using putty to start and stop the iPVM service, but didn't seem to help I got some numbers back as result:
iPVM_Stop: value = 1610612736 = 0x60000000
iPVM_Start : value = 1611137024 = 0x60080000
Thanks for the help!
On a side note: What's the lifespan of a 3300 and it's modules?