Author Topic: How do I get an Analog trunk to ring on a set  (Read 1022 times)

Offline KaptenBlack

  • Contributer
  • *
  • Posts: 12
  • Country: ca
  • Karma: +0/-0
    • View Profile
How do I get an Analog trunk to ring on a set
« on: August 14, 2018, 09:22:49 AM »
I am working on Having a specific analog trunk ring on four users phone. Ideally I want it as a separate Key from the users main line so i can set it to ring for some users and not ring for others. The Trunk is on cabinet 2, Shelf 1, Slot 1, Circuit 10, Trunk number 10.


Offline johnp

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2202
  • Country: us
  • Karma: +66/-0
    • View Profile
Re: How do I get an Analog trunk to ring on a set
« Reply #1 on: August 14, 2018, 07:14:23 PM »
Create a multicall or keyline dn on the phone and have the trunk attribute ring to it

Offline KaptenBlack

  • Contributer
  • *
  • Posts: 12
  • Country: ca
  • Karma: +0/-0
    • View Profile
Re: How do I get an Analog trunk to ring on a set
« Reply #2 on: August 15, 2018, 10:47:17 AM »
Create a multicall or keyline dn on the phone and have the trunk attribute ring to it

Thank you that does Kind of work. It does allow me to easily see the incoming call. 2 Things i want to improve if possible is if I select that key it will select the trunk 0010, and when the call come in it shows it as trunk 10 but I want the Caller ID to come though as well. Do you have any suggestions on how to do this.

I have done a trunk select with the Feature access codes #*#0010 on my system as a speed call. so i might be able to get away with 1 key for incoming and 1 key for outgoing.


 

Sitemap 1 2 3 4 5 6 7 8 9 10