Author Topic: Swapping a console 1000 Superset for a IP Console 5540  (Read 943 times)

Offline Toody

  • Contributer
  • *
  • Posts: 6
  • Country: ca
  • Karma: +0/-0
    • View Profile
Swapping a console 1000 Superset for a IP Console 5540
« on: August 09, 2018, 12:27:50 AM »
We have an MXe3300 with Peripheral SX2000 connected. We also have MCD6.
I am exchanging the old Superset 1000 Console with the Newer IP Console 5540.
I was trying to add the 5540 before I remove the SS1000 however as soon as I try to I get a message.
"Database on requested network element is in use by another application (e.g.MAC of CDE)"

Does this mean the SS100 has to be deleted before I can add the 5540?


Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: Swapping a console 1000 Superset for a IP Console 5540
« Reply #1 on: August 09, 2018, 07:40:10 AM »
Where you trying to print something before this happened?
You may have to go in and cancel the print.

Ralph

Offline Toodyt

  • Contributer
  • *
  • Posts: 17
  • Country: ca
  • Karma: +0/-0
    • View Profile
Re: Swapping a console 1000 Superset for a IP Console 5540
« Reply #2 on: August 09, 2018, 09:40:10 AM »
No have not printed from the controllers at all.

Offline Toodyt

  • Contributer
  • *
  • Posts: 17
  • Country: ca
  • Karma: +0/-0
    • View Profile
Re: Swapping a console 1000 Superset for a IP Console 5540
« Reply #3 on: August 13, 2018, 02:14:38 AM »
Problem Solved.
Rebooted the Controller and then was able to program the new Console 5540.

Sent from my SM-G920W8 using Tapatalk



 

Sitemap 1 2 3 4 5 6 7 8 9 10