connection by RAW port 2002

[sunspark]

Hi ,

I'm not able to connect using Raw port 2002 = connection closed by remot host / network error : connection refused.

any idea ?

Thanks

[acejavelin]

The session is locked up in the controller, try a reboot... only way I have found to fix it.

[sunspark]

The session is locked up in the controller, try a reboot... only way I have found to fix it.

The restart didn't resolve the issue.

[x-man]

I thought they had removed this from later versions of the software?

[acejavelin]

I thought they had removed this from later versions of the software?

Nope... Works in my test bench system, which is current release.

Sunspark, is this a physical or virtual controller?

Sent from my Moto G (5) Plus using Tapatalk

[sunspark]

I thought they had removed this from later versions of the software?

Nope... Works in my test bench system, which is current release.

Sunspark, is this a physical or virtual controller?

Sent from my Moto G (5) Plus using Tapatalk

Virtual

[acejavelin]

I thought they had removed this from later versions of the software?

Nope... Works in my test bench system, which is current release.

Sunspark, is this a physical or virtual controller?

Sent from my Moto G (5) Plus using Tapatalk

Virtual

ssh to the VM host and login... at the # prompt enter:

mcd-debug-console

That will put you into the old RTC shell.

[sunspark]

I thought they had removed this from later versions of the software?

Nope... Works in my test bench system, which is current release.

Sunspark, is this a physical or virtual controller?

Sent from my Moto G (5) Plus using Tapatalk

Virtual

ssh to the VM host and login... at the # prompt enter:

mcd-debug-console

That will put you into the old RTC shell.

------------------------------

I don't have access to ssh : connection refused.

I have only Telnet.

[acejavelin]

You need to enable it in the VM host, it is in Security - Remote Access - Secure Shell Settings, and add your public IP address to Remote Management networks, similar to the example below.

[sunspark]

already done.

I'm able to connect to the msl ( login/password ok = i have access to the console)

What i want to do is : iPVM_Stop / IPVM_Start

[acejavelin]

Connect to MSL console as root (usually via ssh), then enter `mcd-debug-console` which should put you into the RTC shell of the virtual 3300, then enter the iPVM_Stop/Start commands.

There is no other way...

[x-man]

Putty (free download) has ssh connection.

[acejavelin]

Putty (free download) has ssh connection.

SecureCRT works well too, and many companies have it available for other applications they use and maintain. Check with your IT department.

Remember that if you have Windows 10, the Ubuntu Linux shell has a SSH client built in to it as well.

Like x-man recommends though, Putty is kind of the "industry standard" here... Most companies like Mitel, Avaya, Broadsoft, Adtran, etc. use "putty" and ssh almost interchangeably, like saying Q-tips for all cotton swabs, except they will say "just putty into it". 

[sunspark]

Putty (free download) has ssh connection.

SecureCRT works well too, and many companies have it available for other applications they use and maintain. Check with your IT department.

Remember that if you have Windows 10, the Ubuntu Linux shell has a SSH client built in to it as well.

Like x-man recommends though, Putty is kind of the "industry standard" here... Most companies like Mitel, Avaya, Broadsoft, Adtran, etc. use "putty" and ssh almost interchangeably, like saying Q-tips for all cotton swabs, except they will say "just putty into it". 

Thank you guys , after a second reboot it works now. !