Author Topic: change MoH in the queue level  (Read 1278 times)

Offline pacifichydro

  • Jr. Member
  • **
  • Posts: 34
  • Country: au
  • Karma: +0/-0
    • View Profile
change MoH in the queue level
« on: April 26, 2018, 06:24:18 PM »
Hi there

We are using MX3300 system and I have been instructed to change MoH for some queues (1800 number route to that queue)

This is not the default MoH change but change MoH for some certain queues only

I believe we need to modify the RAD port that assign to these queues?

Any one have experience before and can guide me where to check this? Do we need to check this in Your Site Explorer in IVR level?


Offline johnp

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2202
  • Country: us
  • Karma: +66/-0
    • View Profile
Re: change MoH in the queue level
« Reply #1 on: April 26, 2018, 06:36:45 PM »
check the acd path ot should sgow wgat music source it is using

Offline pacifichydro

  • Jr. Member
  • **
  • Posts: 34
  • Country: au
  • Karma: +0/-0
    • View Profile
Re: change MoH in the queue level
« Reply #2 on: April 26, 2018, 07:27:22 PM »
thank you very much when I go to ACD Paths I can see Path Directory Number with Path Name and Path reporting number

I believe this is tide to different queues at the moment?

Do you mind telling me which path options should I look for for MoH?

I can see Inteflow Point Directory Number have been configured, I cansee Directory Number have been configured, DTMF Receiver Unavailable action have been configured with Play RAD

Offline johnp

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2202
  • Country: us
  • Karma: +66/-0
    • View Profile
Re: change MoH in the queue level
« Reply #3 on: April 27, 2018, 07:28:55 AM »
usually after a recording a choice of audio source can be made

Offline VinceWhirlwind

  • Hero Member
  • *****
  • Posts: 899
  • Country: au
  • Karma: +31/-0
    • View Profile
Re: change MoH in the queue level
« Reply #4 on: April 29, 2018, 08:37:31 PM »
You need to look at the Embedded Media Sources form.
#0 is your default music on hold.
Load up your alternate MoH to #1.
 
Next you need to go to your ACD Path form. On the ACD Path where you want alternate MoH, you change the Audio Source to "Embedded" and set it to #1.


 

Sitemap 1 2 3 4 5 6 7 8 9 10