Hi friends,
I am programming an Mitel 5000. The customer wants to lease ip for the Mitel on his DHCP server.
He is using Vlan 20. I gave him the followinfg options so he can program the DHCP Scope on his side.
Options are:
Options43: id:ipphone.mitel.com;sw_tftp=172.21.20.100;call_serv=172.21.20.100;vlan=20;l2p=6;dscp=46
Options125: id:ipphone.mitel.com;sw_tftp=172.21.20.100;call_serv=172.21.20.100;vlan=20;l2p=6;dscp=46
Option3:
IP: 172.21.20.254
Option 128:
IP: 172.21.20.100
Option 129:
IP: 172.21.20.100
Customer has these options programmed in their switch but the ip phones are not gettng ip addresses. I activate the DHCP on the Mitel 500 with these optiones and the phones are getting ip from the DHCP of the Mitel 5000.
Does the customer need to program extra option in their dhcp ?
Customer uses Cisco Meraki MS225.
Please advise.
Gimitel