Author Topic: No 180 Ringing SDP (g711U telephone-event)  (Read 1479 times)

Offline pakman

  • Sr. Member
  • ****
  • Posts: 483
  • Karma: +1/-0
    • View Profile
No 180 Ringing SDP (g711U telephone-event)
« on: March 03, 2018, 09:59:53 PM »
Hello,


I'm having an issue with a set of DIDs all at the same location. You don't hear any ring back when calling. The employee hears the phone ring. I have a few 100 DIDs from this particular vendor and no issues any where else. I have 4 resilient sites programmed off site A. The set of DIDs that's not working are programmed off site A. The 3 other resilient sites are also programmed off site A and they work fine. I get intermittent success when I reboot a piece of equipment and call one of the numbers I will get a ring back. However, the next call dead air. When comparing a wireshark capture between a working DID and non working. I noticed that our equipment never sends the 180 SDP (g711U telephone-event) to our providers adtran.

I changed the following in Sip Peer profile
Allow Using UPDATE For Early Media Renegotiation from no to yes
ignore SDP answers in provisional responses from no to yes

after I changed these I would get a ring back and then dead air.

appreciate any advice.

Thanks,




Offline pakman

  • Sr. Member
  • ****
  • Posts: 483
  • Karma: +1/-0
    • View Profile
Re: No 180 Ringing SDP (g711U telephone-event)
« Reply #1 on: March 05, 2018, 02:49:38 PM »
In the end the provider made some more changes which resolved my issue.


 

Sitemap 1 2 3 4 5 6 7 8 9 10