Guys,
Does anyone know what port or ports is required to be opened on a firewall to allow the creation of new connections to external MBGs or does it use an ephemeral port? I have a MiCollab server in LAN Mode and [2] MBGs in the DMZ in Custom LAN Mode [LAN Mode with Public IP on Set-Side Streaming].
I was told I needed to go to MiCollab Client Deployment > Configuration > Connection to MBGs > Create new connection to setup the deployment properly. When I put in the Description and IP Address and press the Save and Send AuthRequest it just times out with the following message.
Configuration was not saved!
Could not connect to MBG: timed out
I have all of the ports opened up that the MiCollab Engineering Guidelines say need to be opened for the applications I am going to run.
From DMZ [MBG] to LAN [MiCollab]
Source TCP: ANY
Destination TCP: 6800,6801,6802,6809,3998,3999,6880,443,4443,80,36008,5024-5026,5030,7001,7003,8083,8084,4244,8188,1433
UDP: Any
From LAN [MiCollab] to DMZ [MBG]
Source TCP: 6800,6801,6802,6809,3998,3999,6880,443,4443,80,36008,5024-5026,5030,7001,7003,8083,8084,4244,8188,1433
Destination TCP: ANY
UDP: ANY
Thanks,
TE