Author Topic: ASU II  (Read 2938 times)

Offline Hus4in

  • Contributer
  • *
  • Posts: 24
  • Country: id
  • Karma: +0/-0
    • View Profile
ASU II
« on: December 26, 2017, 10:30:45 PM »
Dear All

We have a problem in release 4.1 3300 ICP ,our problem is ASU II (50005105) can't be detected in it, but if we connect to MCD.8.0 3300 ICP ,ASU II can detected.
Any some one help me,thanks for your kind attention.

Rgrds.


Offline ghost

  • Full Member
  • ***
  • Posts: 185
  • Country: au
  • Karma: +11/-0
    • View Profile
Re: ASU II
« Reply #1 on: December 28, 2017, 12:57:26 AM »
what do you get if you run "display asu info" in the maintenace commands?

Offline Hus4in

  • Contributer
  • *
  • Posts: 24
  • Country: id
  • Karma: +0/-0
    • View Profile
Re: ASU II
« Reply #2 on: December 28, 2017, 02:06:57 AM »
Thanks Ghost.
This is display ASU info:

CIM         STATUS         UAPI TYPE ( HUBSP TYPE )     CARD INFO
------------------------------------------------------------------
1      UAPI_APH_DOWN      DS_HUBTYPE_NONE ( UNKNOWN )   ()
2      UAPI_APH_DOWN      DS_HUBTYPE_NONE ( UNKNOWN )   ()
3      UAPI_APH_DOWN      DS_HUBTYPE_NONE ( UNKNOWN )   ()
4      UAPI_APH_DOWN      DS_HUBTYPE_NONE ( UNKNOWN )   ()
5      UAPI_APH_DOWN      DS_HUBTYPE_NONE ( UNKNOWN )   ()
 Cim1 Prom:
        FW:
 Cim2 Prom:
        FW:
 Cim3 Prom:
        FW:
 Cim4 Prom:
        FW:
 Cim5 Prom:
        FW:

Offline Hus4in

  • Contributer
  • *
  • Posts: 24
  • Country: id
  • Karma: +0/-0
    • View Profile
Re: ASU II
« Reply #3 on: December 28, 2017, 04:14:30 AM »
This is connected with MCD 8.0 ,display ASU info:

CIM         STATUS         UAPI TYPE ( HUBSP TYPE )     CARD INFO
------------------------------------------------------------------
1      UAPI_APH_UP      DS_AMB_64 ( UK COMBO )   (55 00 51 50 00 )
2      UAPI_APH_DOWN      DS_HUBTYPE_NONE ( UNKNOWN )   ()
3      UAPI_APH_DOWN      DS_HUBTYPE_NONE ( UNKNOWN )   ()
4      UAPI_APH_UP      DS_ASU2G ( UK COMBO )   (00 00 )
5      UAPI_APH_DOWN      DS_HUBTYPE_NONE ( UNKNOWN )   ()
 Cim1 Prom: 50004870 56008157RC.04 08000F0075D5  1                                                                                         
        FW: MAC:08000F0075D5 | MAIN Ver:04.00.00.14 Date:Mar 05 2008 Time:07:54:08 | FLASH = MAIN
 Cim2 Prom:
        FW:
 Cim3 Prom:
        FW:
 Cim4 Prom: 50005105 56007252RA.05 08000F845F02                                                                                             
        FW: MAC:08000F845F02 | MAIN Ver:01.00.00.35 Date:Nov 05 2015 Time:14:07:17 | BOOT Ver:01.00.00.31 Date:May 08 2012 Time:10:27:50
   Slot 01:
   Slot 02:
 Cim5 Prom:
        FW:

Offline x-man

  • Hero Member
  • *****
  • Posts: 1129
  • Country: gb
  • Karma: +25/-0
    • View Profile
Re: ASU II
« Reply #4 on: December 28, 2017, 05:13:04 AM »
Have you changed the programmed asu type in Analog service units form on the 4.1 system?

Offline Hus4in

  • Contributer
  • *
  • Posts: 24
  • Country: id
  • Karma: +0/-0
    • View Profile
Re: ASU II
« Reply #5 on: December 28, 2017, 06:40:43 AM »
Thanks x-man

I have a program on analog service unit form,on the 4.1 system and here's the result:
Analog Services Units
   Controller Module Port Unit       Programmed Type       Installed Type       Comment                                                                                      
   -                0         Not Programmed      No Unit Present                                                                                          
   -                1     2      ASU II                      No Unit Present                                                                                          
   -                2         Not Programmed      No Unit Present                                                                                          
   -                3         Not Programmed      No Unit Present                                                                                          
   -                4         Not Programmed      No Unit Present                                                                                          



Offline x-man

  • Hero Member
  • *****
  • Posts: 1129
  • Country: gb
  • Karma: +25/-0
    • View Profile
Re: ASU II
« Reply #6 on: December 28, 2017, 08:18:05 AM »
Have you programmed the rest of the form like the card type installed in the asu?

Offline Hus4in

  • Contributer
  • *
  • Posts: 24
  • Country: id
  • Karma: +0/-0
    • View Profile
Re: ASU II
« Reply #7 on: December 28, 2017, 09:26:49 PM »
Thanks for your answered,

I have installed 24 port ONSp card on slot 1 but the system can't be dictected.


Offline x-man

  • Hero Member
  • *****
  • Posts: 1129
  • Country: gb
  • Karma: +25/-0
    • View Profile
Re: ASU II
« Reply #8 on: December 29, 2017, 04:27:18 AM »
What does ASU info say now?

Have you got an IP conflict? ASU2 uses;

192.168.Y.1 to 192.168.Y.15
Where Y ranges from 10 to 13

These must not be used elsewhere on the system. What controller type do you have?
« Last Edit: December 29, 2017, 04:41:04 AM by x-man »

Offline Hus4in

  • Contributer
  • *
  • Posts: 24
  • Country: id
  • Karma: +0/-0
    • View Profile
Re: ASU II
« Reply #9 on: January 01, 2018, 10:42:03 PM »
Thanks x-man
the problem is still the same, we setting IP 10.64.194.86 in the controller unit,
and we use MXe 3300 (4.1 system) with IDE hard disk.

Offline x-man

  • Hero Member
  • *****
  • Posts: 1129
  • Country: gb
  • Karma: +25/-0
    • View Profile
Re: ASU II
« Reply #10 on: January 02, 2018, 05:31:56 AM »
"Upgrade bootrom all" from maintenance and if that fails you have a faulty ASU11. Do a "Status ASU ALL" from maintenance and it will probably show the cim port down (even though the lights are all up). Apparently a know fault from a bit of searching.
« Last Edit: January 02, 2018, 05:34:03 AM by x-man »


 

Sitemap 1 2 3 4 5 6 7 8 9 10