Author Topic: User Unable To Transfer External Calls Internally.  (Read 2762 times)

Offline PeterNicholls

  • Contributer
  • *
  • Posts: 7
  • Country: gb
  • Karma: +0/-0
    • View Profile
User Unable To Transfer External Calls Internally.
« on: September 28, 2017, 11:46:46 AM »
Just been notified by a user that that they are unable to transfer their phone calls.

They work in customer services so this is quite a big problem.

Thanks in advance...i'm aware this might be a bit basic.


Offline x-man

  • Hero Member
  • *****
  • Posts: 1129
  • Country: gb
  • Karma: +25/-0
    • View Profile
Re: User Unable To Transfer External Calls Internally.
« Reply #1 on: September 28, 2017, 12:27:50 PM »
I think a bit more info is required.... System type; software release; phone type; what actually happens when they try to transfer; is it one particular exten or any? and any more info you might have from the user?

Offline SARTECH87

  • Contributer
  • *
  • Posts: 19
  • Country: ca
  • Karma: +0/-0
    • View Profile
Re: User Unable To Transfer External Calls Internally.
« Reply #2 on: September 28, 2017, 06:43:44 PM »
how does he /she perform the transfer? might be stupid but the transfer must be configure in the COS and also the way of doing transfer might be just wrong. Must press the transfer button ( arrow / with faces ) next to hold button and dial the extension and hang up if the transfer is unannounced transfer

Offline PeterNicholls

  • Contributer
  • *
  • Posts: 7
  • Country: gb
  • Karma: +0/-0
    • View Profile
Re: User Unable To Transfer External Calls Internally.
« Reply #3 on: September 29, 2017, 04:18:00 AM »
Hello guys,

SH_vMCD is the software I'm using to manage the phone system.

The user is transferring and the call is being cut off as she presses release me - She is reasonably competent as her job is basically answering and transferring calls.

The phone she is using is the 5320.

Offline PeterNicholls

  • Contributer
  • *
  • Posts: 7
  • Country: gb
  • Karma: +0/-0
    • View Profile
Re: User Unable To Transfer External Calls Internally.
« Reply #4 on: September 29, 2017, 04:24:33 AM »
how does he /she perform the transfer? might be stupid but the transfer must be configure in the COS and also the way of doing transfer might be just wrong. Must press the transfer button ( arrow / with faces ) next to hold button and dial the extension and hang up if the transfer is unannounced transfer

The plot thickens: I have no found that this is a problem with people forwarding TO the user.

And on the phone there is a phone with an arrow on it - Must be a diversion actually placed on the device -

How do I remove this please?

Thanks a lot so far.

Offline Dogbreath

  • Global Moderator
  • Sr. Member
  • *****
  • Posts: 396
  • Country: gb
  • Karma: +18/-0
    • View Profile
Re: User Unable To Transfer External Calls Internally.
« Reply #5 on: October 02, 2017, 08:25:15 AM »
Look at the form "Call Forwarding Profile". Should be fairly self-explanatory.

Offline x-man

  • Hero Member
  • *****
  • Posts: 1129
  • Country: gb
  • Karma: +25/-0
    • View Profile
Re: User Unable To Transfer External Calls Internally.
« Reply #6 on: October 02, 2017, 09:28:59 AM »
maintenance command "Locate feature extn >insert extn number<" will tell you if it is diverted.

Offline PeterNicholls

  • Contributer
  • *
  • Posts: 7
  • Country: gb
  • Karma: +0/-0
    • View Profile
Re: User Unable To Transfer External Calls Internally.
« Reply #7 on: October 05, 2017, 07:22:10 AM »
All sorted now.

I entered *70 on the work and works fine.

Thanks a lot guys. :)


 

Sitemap 1 2 3 4 5 6 7 8 9 10