Hi everybody!
I've recently received a replacement MGU (Media Gateway Unit) for our MX-system but I can't figure out why it wont work properly.
I've configured the MGU trough the USB-interface accordingly to Mitels manuals, but it keeps rebooting and when connected to it, gives out the following message (seen below).
System restarts / "hardware" reboots haven't helped either.
Has anybody seen this before? Is the replacement board faulty, what do you reckon?
Message from syslogd@localhost at Mon Jul 3 14:31:48 2017 ...
localhost MGU: 35386 FATAL MCA : [4635] file: src/main/MediaControlApplication.cpp line: 849 : Failed initializing MSP: VAPI_BootDevice failed
Message from syslogd@localhost at Mon Jul 3 14:31:48 2017 ...
localhost MGU: 35388 FATAL MCA : [4635] file: src/main/MediaControlApplication.cpp line: 257 : Failed initializing MSP
EDIT, MGU-info:
-------------
FPGA: 7.1.1
File system: 0.6.147
Application: mgw-1.6.27-1
Kernel: 2.6.14.7-selinux1-WR1.4aq_cgl #2 PREEMPT Mon May 20 16:40:27 CEST 2013
Boot: R2A
MSP: Not obtainable (erimca not running)
Misc info
---------
If I use the command "mgu_loadmsp" I get the following message:
Please enter at least 1 argumentVAPI_Close: VAPI_Close: VAPI library not initialized.
VAPI_Close: VAPI_Close: VAPI library not initialized.
VAPI_Close: failed
Best Regards,
Martin Nyberg
