Pairing a Mitel Cordless Accessory with the
Cordless Module
To pair a cordless accessory:
Ensure that the battery of the cordless device to be paired is at least partially charged.
Press and hold down the pairing button on the back of the Cordless Module (see Figure 2
on page 106) for 5 to 15 seconds to activate telephone pairing mode. The LED on the Cordless
Module blinks. The Cordless Devices application opens on the telephone and prompts you to press the hook
switch button on the cordless device. The hook switch is the big silver button on the side of
the Mitel Cordless Headset or, on the Mitel Cordless Handset it is the hang-up button. Note that
the manual says to hold the hook switch button for 5 seconds but experience has shown there are times when
you may have to hold the button for up to 30 seconds.
We also recommend see the video below produced by
Trans West.
If You've found this advice helpful, please consider a
donation
to help keep this type of assistance on-line and available.
Please join our forum and follow our
newsletter. Your participation may help others.