Mitel Forums - The Unofficial Source

Advertisements:

and How To

Newsletter

Follow @mitelforums

If you find this site helpful, please consider a donation to help keep this type of assistance on-line and available.

Sponsor Links

How to Shutdown or Restart the Mitel 3300 PBX

Important: Be Sure you have a good backup of the system before shutting down or restarting your PBX

3300 Restart Procedures

Log into the PBX.
Enter System Administration.
Go to Maintenance Commands.
Enter "reset system"
The system will take a few minutes to boot before you will be able to long in again.

3300 Shutdown Procedures

Log into the PBX.
Enter System Administration.
Go to Maintenance Commands.
Enter "shutdown"
- System responds with:
  
  System shutdown in progress...
  .. the system can be powered down safely after 60 seconds.
Wait 90 seconds before pulling the power plug or turning of power on power supply.

3300 Shutdown From the Front Panel or Shell

Connect your laptop to the front panel with a serial cable.
- or Connect via Putty and log into the system.
Enter 'appShutdown'
Wait 90 seconds and power off

3300 Scheduled Reboot

This command will restart your system "off hours"

Log into the PBX.
Enter System Administration.
Go to Maintenance Commands.
Enter "Prog re dis" to see what current schedule is.
Enter "prog re sched <day of week> 2:15"
- This will schedule a reboot at 2:15 in the morning on the day you choose.
Enter "prog re on" to activate the schedule.

Programmed Reboot Command Qualifiers

COURTESY ON

COURTESY OFF

DISPLAY

RESOURCE RECOVERY ON

RESOURCE RECOVERY OFF

RESOURCE RECOVERY <hh:mm:ss>

SCHEDULE ON

SCHEDULE OFF

SCHEDULE DAILY <hh:mm:ss>

SCHEDULE <day-of-week> <hh:mm:ss>

SCHEDULE MONTHLY <week # [1-4]> <day-of-week> <hh:mm:ss>

SCHEDULE INTERVAL <interval in weeks [1-52]> <MMM> <day-of-month> <hh:mm:ss>

Related Forum Post

Click Here For the Mitel Forum

Please join our forum and follow our newsletter. Your participation may help others.

If you've found this article useful please Tweet