Author Topic: SX200 ELx - Message Waiting not working on Analog Sets.  (Read 3230 times)

Offline brogerson

  • Full Member
  • ***
  • Posts: 100
  • Country: ca
  • Karma: +1/-0
    • View Profile
SX200 ELx - Message Waiting not working on Analog Sets.
« on: May 24, 2017, 03:00:25 PM »
A hotel changed all there analog room phones to a Cetis type phone,  they are sure the MWI was working after the set change and now no MWI on analog sets.

There are 5 per bays and no MWI on any of them,  the Ringing LED on the Power supply should be flashing when a phones lamp is lit and the LED is not flashing on any of the Power supplies.

One of the power supplies has been replaced and no Ringing LED on it either.


Offline acejavelin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4058
  • Country: us
  • Karma: +128/-0
  • High-tech, heavy metal redneck!
    • View Profile
    • Like what I do and wanna help out? Send me a donation!
Re: SX200 ELx - Message Waiting not working on Analog Sets.
« Reply #1 on: May 24, 2017, 05:50:17 PM »
A hotel changed all there analog room phones to a Cetis type phone,  they are sure the MWI was working after the set change and now no MWI on analog sets.

There are 5 per bays and no MWI on any of them,  the Ringing LED on the Power supply should be flashing when a phones lamp is lit and the LED is not flashing on any of the Power supplies.

One of the power supplies has been replaced and no Ringing LED on it either.
Have you set a message waiting and checked the voltage of the pair, or listened with a butt set in monitor mode? It is pretty easy to tell if there is a message waiting, you will hear it when on-hook or can measure 90-140 vDC on the pair intermittently to light the light.

It is highly unlikely that all the message waiting is "broken"... The most likely cause is that that the phones were ordered for the wrong message waiting type, or the options of the phone were set incorrectly. There are 2 distinct types of message waiting for lights in PBX's... LED (pretty much all AT&T systems) and NEON (pretty much everyone else, including Mitel). There are other message waiting types like FSK, but they are not supported in this system.

What voicemail system? It is also possible that the message waiting port locked up or the FAC got changed, but need more info to go down that road. If internal VM on ICP did you do a reboot?
« Last Edit: May 24, 2017, 05:53:10 PM by acejavelin »

Offline johnp

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2176
  • Country: us
  • Karma: +66/-0
    • View Profile
Re: SX200 ELx - Message Waiting not working on Analog Sets.
« Reply #2 on: May 24, 2017, 07:39:49 PM »
I would agree that the phone were likely ordered wrong. DC vs AC msg lamp

Offline brogerson

  • Full Member
  • ***
  • Posts: 100
  • Country: ca
  • Karma: +1/-0
    • View Profile
Re: SX200 ELx - Message Waiting not working on Analog Sets.
« Reply #3 on: May 29, 2017, 11:51:47 AM »
The Customer is saying that the new phones did work for a while lets stopped

Offline acejavelin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4058
  • Country: us
  • Karma: +128/-0
  • High-tech, heavy metal redneck!
    • View Profile
    • Like what I do and wanna help out? Send me a donation!
Re: SX200 ELx - Message Waiting not working on Analog Sets.
« Reply #4 on: May 29, 2017, 03:59:20 PM »
The Customer is saying that the new phones did work for a while lets stopped
Then I go back to my first post... What PBX and voicemail system? Does the message waiting light work if set manually (like from a console or callback message)?

Message waiting doesn't just "break", there is a cause... plus you have 5 peripheral bays, and the power supply for generating MSG WT voltage cannot be bad in all of them, this is a configuration or connectivity issue and should be investigated as such, but more info is needed to determine the next path.

Offline RickyTerzis

  • New Member
  • *
  • Posts: 1
  • Country: us
  • Karma: +0/-0
    • View Profile
Re: SX200 ELx - Message Waiting not working on Analog Sets.
« Reply #5 on: August 23, 2017, 01:30:48 PM »
Hi...i am a new user here. As per my knowledge the most likely cause is that that the phones were ordered for the wrong message waiting type, or the options of the phone were set incorrectly. There are 2 distinct types of message waiting for lights in PBX's LED  and NEON.

Offline johnp

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2176
  • Country: us
  • Karma: +66/-0
    • View Profile
Re: SX200 ELx - Message Waiting not working on Analog Sets.
« Reply #6 on: August 23, 2017, 08:21:14 PM »
From what I heard during a Mitel 400 hospitality training introduction,  there may now be 3 different MSG lamp varients

Offline acejavelin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4058
  • Country: us
  • Karma: +128/-0
  • High-tech, heavy metal redneck!
    • View Profile
    • Like what I do and wanna help out? Send me a donation!
Re: SX200 ELx - Message Waiting not working on Analog Sets.
« Reply #7 on: August 24, 2017, 09:53:48 AM »
There is, FSK Msg Waiting that uses CLASS (like Caller ID) to light the light. It is generally not implemented in hospitality systems, typically used by Central Office voice mail systems.

Sent from my XT1575 using Tapatalk


Offline johnp

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2176
  • Country: us
  • Karma: +66/-0
    • View Profile
Re: SX200 ELx - Message Waiting not working on Analog Sets.
« Reply #8 on: August 24, 2017, 09:39:27 PM »
They talked about a lower voltage standard. I was new to me.

Offline acejavelin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4058
  • Country: us
  • Karma: +128/-0
  • High-tech, heavy metal redneck!
    • View Profile
    • Like what I do and wanna help out? Send me a donation!
Re: SX200 ELx - Message Waiting not working on Analog Sets.
« Reply #9 on: August 24, 2017, 11:46:37 PM »
They talked about a lower voltage standard. I was new to me.
Cool... that's a new one on me.

Offline Mikrotik

  • New Member
  • *
  • Posts: 4
  • Karma: +0/-0
    • View Profile
Re: SX200 ELx - Message Waiting not working on Analog Sets.
« Reply #10 on: August 11, 2022, 03:48:09 AM »
A hotel changed all there analog room phones to a Cetis type phone,  they are sure the MWI was working after the set change and now no MWI on analog sets.

There are 5 per bays and no MWI on any of them,  the Ringing LED on the Power supply should be flashing when a phones lamp is lit and the LED is not flashing on any of the Power supplies.

One of the power supplies has been replaced and no Ringing LED on it either.

Were you able to find the solution. I am facing similary issue. MWL is not turning on on Cetis phones.


 

Sitemap 1 2 3 4 5 6 7 8 9 10