Author Topic: 3300 SIP trunk  (Read 5259 times)

Offline MJJONES

  • Contributer
  • *
  • Posts: 23
  • Karma: +0/-0
    • View Profile
3300 SIP trunk
« on: July 28, 2010, 12:42:08 PM »
I have a mitel 3330 on 10.1.1.11_2
I'm trying to bring in a SIP trunk from broadvox. Every time i try to make a call i get a busy signal. When i call broadvox they tell me that the system is adding a + to the 10 digit number I'm dialing.

I don't have any ARS leading digits requirements and i don't have any digit modification plans?

Any suggestion on how i can get the system to stop send the +


Offline bluewhite4

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1041
  • Country: us
  • Karma: +20/-0
    • View Profile
Re: 3300 SIP trunk
« Reply #1 on: July 28, 2010, 12:44:10 PM »
The "+" is an option set in the sip peer profile assignment form. Double check that that isn't selected.

Offline MJJONES

  • Contributer
  • *
  • Posts: 23
  • Karma: +0/-0
    • View Profile
Re: 3300 SIP trunk
« Reply #2 on: July 28, 2010, 01:09:12 PM »
That worked, I cant believe i didn't see that setting before.
With my PRI, only 4 numbers were sent down the line so it was pretty simple to program extensions with DIDs.
The sip trunk sends all 10 numbers down the line, how to a program an extension to ring when using all 10 numbers?

Offline bluewhite4

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1041
  • Country: us
  • Karma: +20/-0
    • View Profile
Re: 3300 SIP trunk
« Reply #3 on: July 28, 2010, 01:12:12 PM »
Create the SIP trunks their own Trunk Service Assignment or Trunk Attributes number, and tell it to strip either 3 or 6 digits. (Make sure to put in here to insert 0.)

If you strip 3, then using System Speed dials create entries for the last 7 of each DID and point it to the needed extension.

If you strip 6, then the extension will match the DID.

Offline MJJONES

  • Contributer
  • *
  • Posts: 23
  • Karma: +0/-0
    • View Profile
Re: 3300 SIP trunk
« Reply #4 on: July 28, 2010, 01:34:29 PM »
Perfect, once again that helped out.

Outbound calls work perfectly. With an inbound call, the phone rings and as soon as i pick it up the call gets disconnected. Any ideas?

Offline bluewhite4

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1041
  • Country: us
  • Karma: +20/-0
    • View Profile
Re: 3300 SIP trunk
« Reply #5 on: July 28, 2010, 09:15:39 PM »
Not off the top of my head. Does outbound work completely now?

Offline MJJONES

  • Contributer
  • *
  • Posts: 23
  • Karma: +0/-0
    • View Profile
Re: 3300 SIP trunk
« Reply #6 on: July 29, 2010, 11:29:09 AM »
issues resolved.
« Last Edit: July 30, 2010, 09:41:52 AM by MJJONES »

Offline Chakara

  • Hero Member
  • *****
  • Posts: 607
  • Karma: +2/-0
    • View Profile
    • Kyle Petree
Re: 3300 SIP trunk
« Reply #7 on: July 30, 2010, 09:40:35 PM »
  What was the fix?


Offline MJJONES

  • Contributer
  • *
  • Posts: 23
  • Karma: +0/-0
    • View Profile
Re: 3300 SIP trunk
« Reply #8 on: August 12, 2010, 03:59:12 PM »
Sorry i didnt post what fixed the issue. I ended up having to buy an Ingate Siparator 19. Once i got that configured correctly, inbound and outbound call started working. I couldnt use my MBG server as a SIP proxy because its in server only mode.
« Last Edit: August 12, 2010, 04:07:17 PM by MJJONES »


 

Sitemap 1 2 3 4 5 6 7 8 9 10