Reboot Mitel 5000 with a PS1 attached.

[markyb73]

Hi guys,

Just after a bit of advice. I need to reboot a 5000 with a PS1.
I cannot get into the programming tool or log in to the web page either which is the reason i need to reboot it.

I can SSH into the PS1 server and can see a reboot system option in there.
Is it just a matter of rebooting there and waiting, and the 5000 chassis will not need its own reboot ?

Thanks in advance

[acejavelin]

You are connecting to the PS-1's IP address with System Administration and Diagnostics and programmer, right? the 5000 chassis is just a gateway now, you don't really do anything in it anymore. Although you should be able to SSH to the 5000 chassis, but there isn't much you can do anymore.

And yes, rebooting the PS-1 is a reboot.

[markyb73]

great, thanks, that worked a treat