Author Topic: 5550 IP console phone book not working  (Read 2369 times)

Offline fcutler

  • Jr. Member
  • **
  • Posts: 66
  • Country: us
  • Karma: +0/-0
    • View Profile
5550 IP console phone book not working
« on: August 10, 2015, 03:04:20 PM »
Our 5550 IP Console is suddenly not displaying any information in the Phone Book. The BLF tab is displaying entries and everything else is functioning normally. I have been digging around but cannot pin down why this is happening all of a sudden. Has anyone seen this before or have any ideas?


Offline bluewhite4

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1041
  • Country: us
  • Karma: +20/-0
    • View Profile
Re: 5550 IP console phone book not working
« Reply #1 on: August 10, 2015, 03:07:14 PM »
I thought the Phonebook only showed information when you searched for someone/extension.

Offline fcutler

  • Jr. Member
  • **
  • Posts: 66
  • Country: us
  • Karma: +0/-0
    • View Profile
Re: 5550 IP console phone book not working
« Reply #2 on: August 10, 2015, 04:33:43 PM »
Yes that is correct. But when you start typing nothing populates.

Offline ghost

  • Full Member
  • ***
  • Posts: 185
  • Country: au
  • Karma: +11/-0
    • View Profile
Re: 5550 IP console phone book not working
« Reply #3 on: August 13, 2015, 03:52:02 AM »
how are you populating the phonebook? Direct connect to directory on phone system or via a spreadsheet/csv

Offline fcutler

  • Jr. Member
  • **
  • Posts: 66
  • Country: us
  • Karma: +0/-0
    • View Profile
Re: 5550 IP console phone book not working
« Reply #4 on: August 14, 2015, 07:15:39 PM »
It's via direct connect to the 3300. I believe this may be related to Windows however. The system running the 5550 software is having trouble installing updates and is stuck in a loop. I'm preparing a new system tonight and will reinstall the 5550 software and see how it goes.

Offline fcutler

  • Jr. Member
  • **
  • Posts: 66
  • Country: us
  • Karma: +0/-0
    • View Profile
Re: 5550 IP console phone book not working
« Reply #5 on: August 26, 2015, 01:20:46 PM »
It turned out that the programmed reboot had been turned off. Rebooting the 3300 solved the problem.


 

Sitemap 1 2 3 4 5 6 7 8 9 10