Author Topic: Handset Volume - cant save  (Read 8723 times)

Offline evan631

  • Sr. Member
  • ****
  • Posts: 228
  • Karma: +1/-0
    • View Profile
Handset Volume - cant save
« on: February 01, 2010, 09:11:48 AM »
I  have at least three 5330 sets that cannot save the handset volume.  Each on separate ICP. 

Any thoughts?  COS are correct, so i do not think it has anything to do with that.



-Evan


Offline v2win

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 628
  • Country: us
  • Karma: +11/-0
    • View Profile
Re: Handset Volume - cant save
« Reply #1 on: February 01, 2010, 09:24:42 AM »
Are they trying to save at the max volume level?

If that is the case have them go all the way up then bump it down one level and see if it will save it at that level. Mitel told me it had to do with heading aid compatibility.

Offline Mitel100

  • Sr. Member
  • ****
  • Posts: 262
  • Country: gb
  • Karma: +6/-0
    • View Profile
Re: Handset Volume - cant save
« Reply #2 on: February 01, 2010, 11:22:42 AM »
Mitel releasaed this statement back in 2006 about this situation:

Under normal circumstances, the COS option (handset volume adjustment - saved) will keep the volume level the same between calls. We have 2 occasions in which the handset volume is reset.

1. If the handset volume is at max. and if the set type is dual mode, the volume is not saved on next call
2. Any type of sets will not keep handset volume on system reboot or set reset

For the first:
FCC regulations require that when a phone's volume is left at the maximum, it must be reset to the default level. The reason for this is, according to the FCC, the maximum volume is intended for hearing impaired individuals. For this reason the volume must be brought back down to the default volume setting. The sets default level is volume level 4. In order to keep the volume at the higher volume after hanging up the handset, you must ensure the user sets the phone volume to at least one level less than the maximum volume.

For the second:
It is important to note that the adjusted volume setting is retained by the phone between calls. However, if either the phone or the 3300 ICP resets, then the previously saved volume setting is lost and the set's volume will go back to the default value.

Note:
Also verify that the Set's COS has Handset Volume Adjustment Saved Enabled. This will have the same affect no matter where the user adjusts the handset/headset volume to. If disabled it will always default the volume back to the default level of 4.


Hope this helps.


 

Sitemap 1 2 3 4 5 6 7 8 9 10