Author Topic: Need Some Cisco Screen Shots (Read 2794 times)

ralph · « **on:** February 18, 2014, 09:02:52 AM »

I'm working on a document where I need some screen shots of setting a Cisco Switch port into access mode for VLAN 100.
I don't have access to a Cisco switch any longer so I need some help.

Exactly what I need is a screen shot (not text) that shows from login to showing the running config of a port (any port) already in VLAN 101 and then showing it being put into VLAN 100.

Can anyone assist with that?

Ralph

sarond · « **Reply #1 on:** February 19, 2014, 01:04:21 AM »

What model switch are you referring to?
Small Business/Linksys model?
I have an SF-300P and a Linksys SGE2000P if that is of any assitance.

ralph · « **Reply #2 on:** February 19, 2014, 08:13:07 AM »

I need something from IOS, even CatIOS would do.
For what I need I don't think Linksys will work.
Thanks.

Ralph

sarond · « **Reply #3 on:** February 19, 2014, 08:04:28 PM »

Sorry can't help, I don't have any cisco IOS switches

lundah · « **Reply #4 on:** February 20, 2014, 08:24:11 AM »

Haven't tried it myself, but maybe this http://sourceforge.net/projects/oece/ will work?

Otherwise you could try GNS3, but then you also have to find a copy of IOS to run on it.

ralph · « **Reply #5 on:** February 20, 2014, 08:32:29 AM »

Thanks lundah,
I didn't think of using a simulator.
The 2 you mentioned appear to be linux based so I'm not sure I'll be able to use them but now that you've pointed me in the right direction I'll look for some other simulators.

Thanks.
Ralph

Mitel Forums - The Unofficial Source

News:

Author Topic: Need Some Cisco Screen Shots (Read 2794 times)

ralph

Need Some Cisco Screen Shots

sarond

Re: Need Some Cisco Screen Shots

ralph

Re: Need Some Cisco Screen Shots

sarond

Re: Need Some Cisco Screen Shots

lundah

Re: Need Some Cisco Screen Shots

ralph

Re: Need Some Cisco Screen Shots