Author Topic: RMAT and PLID  (Read 6607 times)

Offline evan631

  • Sr. Member
  • ****
  • Posts: 228
  • Karma: +1/-0
    • View Profile
RMAT and PLID
« on: June 11, 2009, 03:08:23 PM »
I have two acronyms i am not sure of.

RMAT

and PLID 

Can someone tell me what they are.  I have 3 phones one labled RMAT and the other with numbers under PLID.


Offline Mitel100

  • Sr. Member
  • ****
  • Posts: 262
  • Country: gb
  • Karma: +6/-0
    • View Profile
Re: RMAT and PLID
« Reply #1 on: June 11, 2009, 03:33:16 PM »
Hi evan631,

The definitions are below:

RMAT - Remote Access Terminal - This is used for Engineers to dial into a specific PBX or for the collection of SMDR, which is stored on the Tracker.

PLID - Physycal Line Identity - This series of 4 numbers is the location of extensions on the PBX.

I hope this helps

Offline evan631

  • Sr. Member
  • ****
  • Posts: 228
  • Karma: +1/-0
    • View Profile
Re: RMAT and PLID
« Reply #2 on: June 11, 2009, 03:36:48 PM »
Thanks Mitel100

When it come to PLID...why would only a handfull of phones have this notation?  Could you tell me what the numbers signify?

Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5741
  • Country: us
  • Karma: +468/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: RMAT and PLID
« Reply #3 on: June 11, 2009, 04:39:32 PM »
PLIDs only apply to prime lines, ONS ports and trunk ports.   

Example PLID   5-1-1-2
1st number: Cabinet
2nd number: shelf
3rd number: card
4th number: circuit
You may also see a 5th number: sub circ.


You can stat a plid by typing: stat 5-1-1-2

As for RMATS - can also stand for Remote Maintenace And Testing Services.
That is actually my job title: RMATS Manager.  I run our remote services center.  Mitel, Nortel, Juniper, Telrad.

Ralph
So much pain.  So little glory.
« Last Edit: November 04, 2013, 10:25:54 AM by ralph »


 

Sitemap 1 2 3 4 5 6 7 8 9 10