Author Topic: How to monitor the state of the nupoint port?  (Read 5628 times)

Offline august

  • Sr. Member
  • ****
  • Posts: 258
  • Country: ca
  • Karma: +9/-0
    • View Profile
How to monitor the state of the nupoint port?
« on: August 02, 2012, 10:20:49 AM »
I try to find a command that let me know if my port are idle or busy.

I found the command VCCS, but this is not exactly what I'm looking for.

Is there something else?


Online acejavelin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4058
  • Country: us
  • Karma: +128/-0
  • High-tech, heavy metal redneck!
    • View Profile
    • Like what I do and wanna help out? Send me a donation!
Re: How to monitor the state of the nupoint port?
« Reply #1 on: August 06, 2012, 09:59:15 AM »
What exactly are you looking for? vccs is the most common way to do this, you could also use 'stat ext <ext num>' in the 3300 to see what the ports are doing?

Offline v2win

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 628
  • Country: us
  • Karma: +11/-0
    • View Profile
Re: How to monitor the state of the nupoint port?
« Reply #2 on: August 06, 2012, 03:55:25 PM »
In the NuPoint go into system then do a shutdown it will ask if you really want to shutdown and will show all the ports and if they are idle or busy as well as the MWI queue.

Offline august

  • Sr. Member
  • ****
  • Posts: 258
  • Country: ca
  • Karma: +9/-0
    • View Profile
Re: How to monitor the state of the nupoint port?
« Reply #3 on: August 06, 2012, 08:03:15 PM »
Thanks, I will try it.

The VCCS command show too much info.  Each time a port received a call, you received all the info.  I just want the busy, idle....

Online acejavelin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4058
  • Country: us
  • Karma: +128/-0
  • High-tech, heavy metal redneck!
    • View Profile
    • Like what I do and wanna help out? Send me a donation!
Re: How to monitor the state of the nupoint port?
« Reply #4 on: August 07, 2012, 10:49:21 AM »
Perhaps all you need is to put a BLF/DSS key for each Nupoint extension on a phone, perhaps on page 3 of a 5340 or something? This will let you monitor the status of each port in real time.

Offline august

  • Sr. Member
  • ****
  • Posts: 258
  • Country: ca
  • Karma: +9/-0
    • View Profile
Re: How to monitor the state of the nupoint port?
« Reply #5 on: August 07, 2012, 12:40:53 PM »
Good idea!!!

Offline v2win

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 628
  • Country: us
  • Karma: +11/-0
    • View Profile
How to monitor the state of the nupoint port?
« Reply #6 on: August 07, 2012, 05:30:54 PM »
I had my hand slapped by tech support for that when it was DNIC integration I don't know about IP.

Online acejavelin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4058
  • Country: us
  • Karma: +128/-0
  • High-tech, heavy metal redneck!
    • View Profile
    • Like what I do and wanna help out? Send me a donation!
Re: How to monitor the state of the nupoint port?
« Reply #7 on: August 09, 2012, 12:47:40 AM »
I had my hand slapped by tech support for that when it was DNIC integration I don't know about IP.
lol... if I had a nickel for every time tech support tried to slap my hand and said don't do that or it will never work, yet it worked fine... well, lets just say I would probably have enough nickels for the pop machine, but not enough to pay for lunch with them and tick off the waitress at TGI Fridays. Still, that's a fair amount of nickels...

Now, I wouldn't put a BLF key on 15 phones for each of the VM ports, but if it is just for 1 phone for you to monitor, probably not a big deal.
« Last Edit: August 09, 2012, 12:51:49 AM by acejavelin »


 

Sitemap 1 2 3 4 5 6 7 8 9 10