Author Topic: Need holiday announcement  (Read 8356 times)

Offline eciroglu

  • Jr. Member
  • **
  • Posts: 41
  • Karma: +0/-0
    • View Profile
Need holiday announcement
« on: July 09, 2012, 04:54:35 AM »
Hi,

I need a holiday announcement that is valid for specific period of day/time range.

For instance; during 4-days public holiday, an anouncement answers all calls,plays recorded message and hangs up at the end of record.

Is it possible?

Thanks.

Volkan,


Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5739
  • Country: us
  • Karma: +468/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: Need holiday announcement
« Reply #1 on: July 09, 2012, 05:59:39 AM »
Is this the embedded voice mail or NuPoint?

Ralph

Offline eciroglu

  • Jr. Member
  • **
  • Posts: 41
  • Karma: +0/-0
    • View Profile
Re: Need holiday announcement
« Reply #2 on: July 09, 2012, 07:06:05 AM »
It is the embedded voice mail.

Thanks.

Volkan,

Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5739
  • Country: us
  • Karma: +468/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: Need holiday announcement
« Reply #3 on: July 09, 2012, 08:50:37 AM »
Temp greeting won't disconnect a call.  It will only change the greeting.
The only way I can think to disconnect a call like you're asking for is to create an ACD path queues for 1 second (important).
Interflow after 1 second to VM that has a transfer mailbox.   Record your greeting in the transfer mailbox. 
Set the transfer mailbox to send to a second ACD path that queues for 1 second and then drops.
Next, reroute all the numbers you want to hear the temp greeting and disconnect in Night 2 mode to the 1st ACD path.
To use it, put your system in Night 2 mode.

Haven't ever tried the above and the part I'm not sure of is the transfer box.
You'll have to try it out.

Ralph

Offline x-man

  • Hero Member
  • *****
  • Posts: 1129
  • Country: gb
  • Karma: +25/-0
    • View Profile
Re: Need holiday announcement
« Reply #4 on: July 09, 2012, 01:53:15 PM »
Why not just use a announcement only mailbox, which just disconnects at its end? Just route all calls to the box. done.

Offline acejavelin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4058
  • Country: us
  • Karma: +128/-0
  • High-tech, heavy metal redneck!
    • View Profile
    • Like what I do and wanna help out? Send me a donation!
Re: Need holiday announcement
« Reply #5 on: July 09, 2012, 04:11:12 PM »
Pretty sure an announcement mailbox will return the caller to the main auto attendant after the message is played. Best bet here for those specific requirements is to make a RAD, then route the calls to the RAD during the period needed.

Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5739
  • Country: us
  • Karma: +468/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: Need holiday announcement
« Reply #6 on: July 09, 2012, 04:11:57 PM »
X-man,
Oh, there you go.   Trying to make life easy. 
Why do something in one step when you can do it in 15?
 ::)

Seriously though,   I didn't realize an announcement box would hang up.

Ralph

Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5739
  • Country: us
  • Karma: +468/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: Need holiday announcement
« Reply #7 on: July 09, 2012, 04:16:08 PM »
In the old days, if you routed a call directly to a RAD, it turned it into a with an announcement with DISA functionality. 
Somewhere in the back of my mind I think that has changed but will it disconnect the call after playing?
If you put the RAD in an ACD path you can get it to disconnect but am I adding more steps than needed again?

Ralph

Offline acejavelin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4058
  • Country: us
  • Karma: +128/-0
  • High-tech, heavy metal redneck!
    • View Profile
    • Like what I do and wanna help out? Send me a donation!
Re: Need holiday announcement
« Reply #8 on: July 09, 2012, 04:20:27 PM »
I have done this on the SX200, same VM so using the RAD should work...

There is a very simple answer to this as well, if you have an open ONS port, buy a $10 answering machine that can make an announcement, put it on a ONS port, record message in answering machine, then ring trunks to answering machine! Minimal setup and cost, very few steps... only drawback is volume handling.

Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5739
  • Country: us
  • Karma: +468/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: Need holiday announcement
« Reply #9 on: July 09, 2012, 04:47:57 PM »
Answering machine!  Truly old school.

Ralph

Offline x-man

  • Hero Member
  • *****
  • Posts: 1129
  • Country: gb
  • Karma: +25/-0
    • View Profile
Re: Need holiday announcement
« Reply #10 on: July 10, 2012, 08:08:10 AM »
Information only mailbox (which is what I meant by announcement)

"After listening to the information, the caller can hang up, dial 0 to reach the operator, or dial another extension"...so I was nearly there. I don't know if there is any other prompt from the AA about dialling etc. but IIRC there isn't and haven't got a lab system up at the minute to test it.

Offline acejavelin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4058
  • Country: us
  • Karma: +128/-0
  • High-tech, heavy metal redneck!
    • View Profile
    • Like what I do and wanna help out? Send me a donation!
Re: Need holiday announcement
« Reply #11 on: July 10, 2012, 09:33:31 AM »
Tried it quick on lab system... setup a Information Mailbox and recorded a greeting in it and you get get a canned prompt after the mailbox greeting of "You may enter another extension now, for assistance press 0, to end this call simply hang-up..." then after a timeout it goes to the regular "root" day or night AA greeting.

Offline x-man

  • Hero Member
  • *****
  • Posts: 1129
  • Country: gb
  • Karma: +25/-0
    • View Profile
Re: Need holiday announcement
« Reply #12 on: July 10, 2012, 09:55:35 AM »
Will that depend on supercivesd/unsupervised transfer?

Offline acejavelin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4058
  • Country: us
  • Karma: +128/-0
  • High-tech, heavy metal redneck!
    • View Profile
    • Like what I do and wanna help out? Send me a donation!
Re: Need holiday announcement
« Reply #13 on: July 10, 2012, 11:58:32 AM »
Just tested it... seems irrelevant to the supervised transfers being enabled or not, I don't think it's "transferring", it's more like it is routing through the VM system.

Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5739
  • Country: us
  • Karma: +468/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: Need holiday announcement
« Reply #14 on: July 10, 2012, 12:15:03 PM »
I'm not sure that eciroglu is still monitoring this thread.
He originated the thread but hasn't jumped back in for a while.
I wonder if we're chasing something that moot at the moment.

Ralph


 

Sitemap 1 2 3 4 5 6 7 8 9 10